OEM 2007 Toyota Prius Antenna Cable

2007 Toyota Prius Parts Questions & Experts Answers

• Q: How to service the radio antenna cable on 2007 Toyota Prius?

  A: Serving the radio antenna cord requires disconnecting the cable from the battery terminal while waiting for at least ninety seconds to stop Air Bag and seat belt pretensioner activation. The service on the antenna cord begins by removing the roof headlining assembly before disconnecting the connector and unfastening 10 clamps while removing the ground bolt and antenna cord. Take out the instrument panel sub-assembly after completing this step. You must disconnect the antenna cord sub-assembly No. 2 connector then loosen its 3 clamps and detach 2 claws before deleting the antenna cord. Begin with the installation of the No. 2 antenna cord sub-assembly where clamps and claws need attachment before connecting the connector. Begin with instrument panel sub-assembly installation after which mount the antenna cord sub-assembly by fastening the 10 clamps and inserting the antenna cord with the bolt tightened to 7.0 N.m (71 kgf.cm, 62 in.lbf). Finally attach the connector to complete. The final step includes roof headlining assembly installation followed by cable reconnection to the negative terminal. System initialization should occur since some systems need initialization upon cable unplementing and reimplanting.