Other Name: Switch, Courtesy Lamp; Door Jamb Switch, Front, Rear; Switch Assembly, Courtesy Lamp (For Front, Rear, Back Door)
Manufacturer Note: TYPE B:REFER ILLUST.
Replaces: 84231-0D030, 84231-46020
Item Weight: 0.40 Pounds
Item Dimensions: 2.7 x 2.0 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 84231-60070
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Prius Submodels:
2020 Edition, Base, Five, Four, Four Touring, L Eco, LE, Limited, One, Persona Series, Three, Three Touring, Touring, Two, Two Eco, XLE | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
Other Name: Switch Assembly, Courtesy; Door Jamb Switch
Item Weight: 0.40 Pounds
Item Dimensions: 2.7 x 2.1 x 1.2 inches
Condition: New
SKU: 84230-53010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following 2007 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2007 Toyota Prius Door Jamb Switch
Looking for affordable OEM 2007 Toyota Prius Door Jamb Switch? Explore our comprehensive catalogue of genuine 2007 Toyota Prius Door Jamb Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Prius Parts Questions & Experts Answers
Q: How to service the Front Door Jamb Switch on 2007 Toyota Prius?
A: Service on the Front Door Courtesy Switch begins by removing the negative cable connection from the battery terminal then waiting 90 seconds to stop Air Bags and pretensioners from launching. The first step involves removing the Front Door Courtesy Light Switch Assembly by uninstalling its bolt and switch component and disconnecting its connector. The installation procedure requires connection of the connector followed by switching and bolting of the device. Reset the system through initialization procedures. The initialization step applies to systems that need this procedure after disconnecting and reconnecting the cable to the negative terminal.