How to service the Center Air Bag Sensor Assembly on 2007 Toyota 4Runner?

The first step for servicing the Center Air Bag Sensor Assembly requires reading all Restraint Systems Service Precautions carefully. Start by severing the cable connection at the negative terminal of the battery. Start the service by taking out the console upper rear panel sub-assembly, console panel sub-assembly upper, console upper panel garnish No.1, console upper panel garnish No.2, console box assembly rear, console box mounting bracket front and console box duct No.1. The 3 connectors must be detached from the center Air Bag sensor assembly before extracting it using its 3 bolts. Bring the procedure to a close only when the ignition switch points off and the battery negative terminal receives 90-second waiting time before the process starts. If you drop or see defects on the center Air Bag sensor assembly then replace it immediately before you install the assembly with the 3 attaching bolts. Adequate spacing must exist between the SRS wiring to prevent interference with other parts as well as to avoid pinching. The three bolts should be tightened to 17.5 N.m while inspecting the bolt segment for any signs of installation looseness. Affix the 3 connectors to the center Air Bag sensor assembly before ensuring that the waterproof sheet is appropriately installed. The installation process continues with the console box duct No.1 followed by console box mounting bracket front then console box assembly rear and console upper panel garnish No.2 along with console upper panel garnish No.1 and concluding with console panel sub-assembly upper and console upper rear panel sub-assembly. After inspecting the SRS warning light you must reconnect the cable to the negative battery terminal.

OEM 2007 Toyota 4Runner Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
2007 Toyota 4Runner Sensor, Air Bag, Front Passenger Side
Part Number: 89173-49405
$107.59 MSRP: $129.72
You Save: $22.13 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Sensor, Air Bag, Front Driver Side; Air Bag Sensor
- Manufacturer Note: TYPE B:REFER ILLUST.
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 3.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-49405
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2007 Toyota 4Runner Diagnostic Module
Part Number: 89170-35222
$180.51 MSRP: $221.37
You Save: $40.86 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Diagnostic Unit
- Item Weight: 1.70 Pounds
- Condition: New
- SKU: 89170-35222
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2007 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2007 Toyota 4Runner Side Impact Sensor, Passenger Side
Part Number: 89860-35010
$212.25 MSRP: $260.31
You Save: $48.06 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Right; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
- Position: Passenger Side
- Part Name Code: 89860
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2007 Toyota 4Runner Side Impact Sensor, Driver Side
Part Number: 89830-35010
$191.37 MSRP: $234.70
You Save: $43.33 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Left; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Driver Side
- Position: Driver Side
- Part Name Code: 89860A
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89830-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2007 Toyota 4Runner Rear Sensor, Passenger Side
Part Number: 89833-35010
$120.97 MSRP: $171.24
You Save: $50.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Right; Air Bag Sensor; Sensor, Air Bag, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89833
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89833-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2007 Toyota 4Runner Rear Sensor, Driver Side
Part Number: 89834-35010
$122.89 MSRP: $173.97
You Save: $51.08 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Left; Air Bag Sensor; Sensor, Air Bag, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89834
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89834-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2007 Toyota 4Runner Position Sensor, Driver Side
Part Number: 89178-0W010
$79.26 MSRP: $111.27
You Save: $32.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Air Bag Sensor; Seat; Sensor, Seat Position Air Bag
- Position: Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-0W010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2007 Toyota 4Runner Air Bag Sensor

Looking for affordable OEM 2007 Toyota 4Runner Air Bag Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota 4Runner Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota 4Runner Air Bag Sensor Parts Q&A

Q: How to service the Center Air Bag Sensor Assembly on 2007 Toyota 4Runner?
A: The first step for servicing the Center Air Bag Sensor Assembly requires reading all Restraint Systems Service Precautions carefully. Start by severing the cable connection at the negative terminal of the battery. Start the service by taking out the console upper rear panel sub-assembly, console panel sub-assembly upper, console upper panel garnish No.1, console upper panel garnish No.2, console box assembly rear, console box mounting bracket front and console box duct No.1. The 3 connectors must be detached from the center Air Bag sensor assembly before extracting it using its 3 bolts. Bring the procedure to a close only when the ignition switch points off and the battery negative terminal receives 90-second waiting time before the process starts. If you drop or see defects on the center Air Bag sensor assembly then replace it immediately before you install the assembly with the 3 attaching bolts. Adequate spacing must exist between the SRS wiring to prevent interference with other parts as well as to avoid pinching. The three bolts should be tightened to 17.5 N.m while inspecting the bolt segment for any signs of installation looseness. Affix the 3 connectors to the center Air Bag sensor assembly before ensuring that the waterproof sheet is appropriately installed. The installation process continues with the console box duct No.1 followed by console box mounting bracket front then console box assembly rear and console upper panel garnish No.2 along with console upper panel garnish No.1 and concluding with console panel sub-assembly upper and console upper rear panel sub-assembly. After inspecting the SRS warning light you must reconnect the cable to the negative battery terminal.