Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Air Bag Sensor; Seat; Sensor, Seat Position Air Bag
Position: Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.1 x 1.6 x 1.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-0W010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2006 Toyota 4Runner Air Bag Sensor
Looking for affordable OEM 2006 Toyota 4Runner Air Bag Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota 4Runner Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota 4Runner Parts Questions & Experts Answers
Q: How to replace the Side Air Bag Sensor Assy LH on 2006 Toyota 4Runner?
A: A technician must observe Air Bag Systems service precautions before disconnecting the battery negative terminal as the first step to replace the Side Air Bag Sensor Assy LH. First detach the LH front door scuff plate followed by the rear door scuff plate LH, the front door opening trim Weather Strip LH, the rear door opening trim Weather Strip LH and finally the lap belt outer anchor cover, center pillar garnish lower LH and front seat outer belt assembly LH. The second step involves removing the side air bag sensor assembly LH through two nut uninstallation and connector detachment. Secure the side air bag sensor assembly LH by connecting its side Air Bag sensor connector then fastening with 2 nuts achieving 17.5 N.m (178 kgf.cm, 13 ft.lbf) torque. The sensor assembly needs replacement with a new one whenever it experiences a drop or shows any dysfunctional elements. The SRS wiring must be positioned to avoid assembly interference and must be free from pinching during installation while sensor assembly looseness can be checked through post-installation sensor shaking. Install the front seat outer belt assembly LH by using 7.5 N.m (76 kgf.cm, 66 in.lbf) when tightening the upper bolt along with 42 N.m (420 kgf.cm, 31 ft.lbf) for the lower bolt. The SRS warning light needs final inspection for any warning indications.