How to install the rear Air Bag sensor on the LH side on 2008 Toyota 4Runner?

Start the installation process of rear Air Bag sensor on the LH side only when both ignition switch is off and battery negative (-) terminal is disconnected and wait at least 90 seconds before continuing onward. Use 2 bolts to attach the rear Air Bag sensor LH component and torque them to 17.5 Nm (179 kgf-cm, 13 ft-lbf). A new rear Air Bag sensor LH needs installation when the existing sensor demonstrates dropped condition or presents evidence of case, bracket, connector, or any crack, dent, or defect. It is crucial to verify that no wire connections from the SRS system touch or become trapped beneath other vehicle components during the installation. Verify that all installation components remain stable. The installation process includes connecting the connector to the rear Air Bag sensor LH before executing the order of installation for the deck side trim cover LH, deck trim side board UPR LH, lap belt outer anchor cover rear No. 1 seat, rear door opening trim Weather Strip LH, rear door scuff plate LH, deck floor box LH, rear floor mat support plate rear, deck board assembly, and tonneau cover retractor sub-assembly. Finish the repair by checking the SRS warning light during an inspection of its proper functioning and by connecting the negative battery cable terminals.

OEM 2008 Toyota 4Runner Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
2008 Toyota 4Runner Sensor, Air Bag, Front Passenger Side
Part Number: 89173-49405
$98.70 MSRP: $119.00
You Save: $20.30 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Sensor, Air Bag, Front Driver Side; Air Bag Sensor
- Manufacturer Note: TYPE B:REFER ILLUST.
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 3.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-49405
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Diagnostic Module
Part Number: 89170-35222
$180.51 MSRP: $221.37
You Save: $40.86 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Diagnostic Unit
- Item Weight: 1.70 Pounds
- Condition: New
- SKU: 89170-35222
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Side Impact Sensor, Passenger Side
Part Number: 89860-35010
$194.66 MSRP: $238.73
You Save: $44.07 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Right; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
- Position: Passenger Side
- Part Name Code: 89860
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Side Impact Sensor, Driver Side
Part Number: 89830-35010
$191.37 MSRP: $234.70
You Save: $43.33 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Left; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Driver Side
- Position: Driver Side
- Part Name Code: 89860A
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89830-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Rear Sensor, Passenger Side
Part Number: 89833-35010
$120.97 MSRP: $171.24
You Save: $50.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Right; Air Bag Sensor; Sensor, Air Bag, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89833
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89833-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Rear Sensor, Driver Side
Part Number: 89834-35010
$122.89 MSRP: $173.97
You Save: $51.08 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Left; Air Bag Sensor; Sensor, Air Bag, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89834
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89834-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Position Sensor, Driver Side
Part Number: 89178-0W010
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Air Bag Sensor; Seat; Sensor, Seat Position Air Bag
- Position: Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-0W010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2008 Toyota 4Runner Air Bag Sensor

Looking for affordable OEM 2008 Toyota 4Runner Air Bag Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota 4Runner Parts Questions & Experts Answers

Q: How to install the rear Air Bag sensor on the LH side on 2008 Toyota 4Runner?
A: Start the installation process of rear Air Bag sensor on the LH side only when both ignition switch is off and battery negative (-) terminal is disconnected and wait at least 90 seconds before continuing onward. Use 2 bolts to attach the rear Air Bag sensor LH component and torque them to 17.5 Nm (179 kgf-cm, 13 ft-lbf). A new rear Air Bag sensor LH needs installation when the existing sensor demonstrates dropped condition or presents evidence of case, bracket, connector, or any crack, dent, or defect. It is crucial to verify that no wire connections from the SRS system touch or become trapped beneath other vehicle components during the installation. Verify that all installation components remain stable. The installation process includes connecting the connector to the rear Air Bag sensor LH before executing the order of installation for the deck side trim cover LH, deck trim side board UPR LH, lap belt outer anchor cover rear No. 1 seat, rear door opening trim Weather Strip LH, rear door scuff plate LH, deck floor box LH, rear floor mat support plate rear, deck board assembly, and tonneau cover retractor sub-assembly. Finish the repair by checking the SRS warning light during an inspection of its proper functioning and by connecting the negative battery cable terminals.