How to remove and reinstall the Front Passenger Air Bag Assembly on 2007 Scion tC?

The process of taking out the Front Passenger Air Bag Assembly starts with disconnecting the negative battery cable terminal's cable then waiting minimum 90 seconds so Air Bags along with seat belt pretensioners do not activate. The first step to replace this Air Bag involves removing the glove compartment door assembly before disconnecting the Air Bag connector while protecting the Air Bag wire harness. The instrument panel sub-assembly upper and its clip and connectors need to be removed before taking out the instrument panel wire assembly. Start by removing the two screws then use slight front-side Air Bag door deflection to free it from its hook before rolling the front passenger Air Bag assembly in a back direction. To finish the disassembly process empty the rear side Air Bag door hook before taking the component. The front passenger Air Bag assembly should be placed back with 2 screws in position while connecting connectors to the Air Bag before installing the clip and reattaching the instrument panel sub-assembly upper. Meld the Air Bag connector while being sure to avoid any damage to the wire harness before fixing the glove compartment door assembly. After putting back the negative battery cable you need to initialize specific systems before checking for the SRS warning lamp.

OEM 2007 Scion tC Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Air Bags found

View related parts
2007 Scion tC Knee Air Bag
Part Number: 73900-21020-B0
$931.93 MSRP: $1365.75
You Save: $433.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Lower; Air Bag Assembly, Instrument Panel, Lower
- Manufacturer Note: DK.GRAY,TRIM1#
- Part Name Code: 73900
- Item Weight: 7.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73900-21020-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2007 Scion tC Inflator Curtain, Driver Side
Part Number: 62180-21010
$779.14 MSRP: $1141.85
You Save: $362.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Left; Head Air Bag; Air Bag Assembly, Curtain Shield, Driver Side
- Manufacturer Note: SRS AIR BAG-W(SIDE & CURTAIN SHIELD)
- Position: Driver Side
- Part Name Code: 62180A
- Item Weight: 11.40 Pounds
- Item Dimensions: 48.3 x 18.7 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 62180-21010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2007 Scion tC Inflator Curtain, Passenger Side
Part Number: 62170-21010
$779.14 MSRP: $1141.85
You Save: $362.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Right; Head Air Bag; Air Bag Assembly, Curtain Shield, Passenger Side
- Manufacturer Note: SRS AIR BAG-W(SIDE & CURTAIN SHIELD)
- Position: Passenger Side
- Part Name Code: 62170A
- Item Weight: 12.30 Pounds
- Item Dimensions: 47.8 x 18.2 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 62170-21010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2007 Scion tC Passenger Air Bag
Part Number: 73960-21021
$684.78 MSRP: $1003.56
You Save: $318.78 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
- Part Name Code: 73960A
- Item Weight: 8.50 Pounds
- Item Dimensions: 15.5 x 11.5 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73960-21021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2007 Scion tC Air Bag

Looking for affordable OEM 2007 Scion tC Air Bag? Explore our comprehensive catalogue of genuine 2007 Scion tC Air Bag. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Scion tC Parts Questions & Experts Answers

Q: How to remove and reinstall the Front Passenger Air Bag Assembly on 2007 Scion tC?
A: The process of taking out the Front Passenger Air Bag Assembly starts with disconnecting the negative battery cable terminal's cable then waiting minimum 90 seconds so Air Bags along with seat belt pretensioners do not activate. The first step to replace this Air Bag involves removing the glove compartment door assembly before disconnecting the Air Bag connector while protecting the Air Bag wire harness. The instrument panel sub-assembly upper and its clip and connectors need to be removed before taking out the instrument panel wire assembly. Start by removing the two screws then use slight front-side Air Bag door deflection to free it from its hook before rolling the front passenger Air Bag assembly in a back direction. To finish the disassembly process empty the rear side Air Bag door hook before taking the component. The front passenger Air Bag assembly should be placed back with 2 screws in position while connecting connectors to the Air Bag before installing the clip and reattaching the instrument panel sub-assembly upper. Meld the Air Bag connector while being sure to avoid any damage to the wire harness before fixing the glove compartment door assembly. After putting back the negative battery cable you need to initialize specific systems before checking for the SRS warning lamp.