Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Front Right; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
Manufacturer Note: SRS AIR BAG-W(SIDE & CURTAIN SHIELD)
Position: Passenger Side
Part Name Code: 89860
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 2.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89860-21031
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front Left; Air Bag Seat Sensor Mat, Front Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
Position: Front Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.2 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Scion tC Submodels:
Base, Spec | 4 Cyl 2.4 L GAS
2007 Scion tC Air Bag Sensor
Looking for affordable OEM 2007 Scion tC Air Bag Sensor? Explore our comprehensive catalogue of genuine 2007 Scion tC Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Scion tC Air Bag Sensor Parts Q&A
Q: How to service the Front Air Bag Sensor on 2007 Scion tC?
A: Begin service of the Front Air Bag Sensor by disconnecting the negative battery terminal cable then waiting for ninety seconds to avoid Air Bag and seat belt pretensioner activation. Start by taking off both engine under covers before disconnecting the connector of the left front Air Bag sensor while removing its two bolts. Service the right front Air Bag sensor by implementing the same method already used for the left sensor. The left front Air Bag sensor requires two bolts for attachment with 9.0 N.m torque (92 kgf.cm, 80 in.lbf) while inspecting for damages before replacement when the sensor has been dropped or shows defects. Confirm that the SRS wiring runs in a manner which avoids contact with surrounding components and does not suffer from pinching. The sensor connector needs to be connected once you verify that installation parts maintain proper torque. Use the same safety measures when installing the sensor to the right front Air Bag position. Users must connect the cable terminal to the negative battery then initialize system components according to specific requirements before verifying that the SRS warning light operates correctly.