How to service and repair the Center Air Bag Sensor Assembly on 2006 Toyota Tacoma?

The repair process for the Center Air Bag Sensor Assembly starts with disconnecting the negative battery cable before leaving it for at least 90 seconds to stop Air Bag activation. Start by detaching the Console Upper Rear Panel Sub-Assembly for Automatic and Manual Transmission in Separate Seat Type. Then disconnect the Rear Console Box Assembly that belongs to Separate Seat Type. Start by removing the Instrument Panel Cup Holder Tray as well as the Front Console Box that applies to Automatic and Manual Transmission for Separate and Bench Seats. The holder needs its connectors and three bolts removed after separating it from the Center Air Bag Sensor Assembly. Install the Center Air Bag Sensor Assembly by making sure the ignition switch is OFF along with disconnecting the battery negative terminal first and then hand-tighten the assembly using three bolts to a torque value of 17.5 N.m (179 kgf.cm, 13 ft.lbf). The SRS wiring must have free movement between other components and no contact with pinch points while making sure the sensor assembly has no damage and the waterproof sheet remains correctly placed. The holder needs reconnection using its connectors before installing the Front Console Box followed by the Instrument Panel Cup Holder Tray, Rear Console Box Assembly and Console Upper Rear Panel Sub-Assembly for both transmission types. You must connect the cable to the negative battery terminal using a torque value of 3.9 N.m (40 kgf.cm, 35 in.lbf) after which you should examine the SRS warning light.

OEM 2006 Toyota Tacoma Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Air Bag Sensors found

View related parts
2006 Toyota Tacoma Front Impact Sensor
Part Number: 89173-09270
$97.75 MSRP: $117.85
You Save: $20.10 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Replaces: 89173-09280
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09270
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Toyota Tacoma Position Sensor, Passenger Side
Part Number: 89178-06030
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front/Right/Left; Air Bag Seat Sensor Mat; Occupant Detection Sensor; Air Bag Sensor; Occupant Sensor; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Toyota Tacoma Position Sensor, Passenger Side
Part Number: 89178-06020
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left, Right; Air Bag Sensor; Occupant Sensor; Seat; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Toyota Tacoma Side Impact Sensor, Front
Part Number: 89831-02040
$97.87 MSRP: $118.00
You Save: $20.13 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front, Upper; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-02040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Toyota Tacoma Rear Sensor
Part Number: 89831-04020
$94.08 MSRP: $113.43
You Save: $19.35 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Toyota Tacoma Position Sensor, Driver Side
Part Number: 89178-0W010
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Air Bag Sensor; Seat; Sensor, Seat Position Air Bag
- Position: Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-0W010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2006 Toyota Tacoma Air Bag Sensor

Looking for affordable OEM 2006 Toyota Tacoma Air Bag Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Tacoma Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the Center Air Bag Sensor Assembly on 2006 Toyota Tacoma?
A: The repair process for the Center Air Bag Sensor Assembly starts with disconnecting the negative battery cable before leaving it for at least 90 seconds to stop Air Bag activation. Start by detaching the Console Upper Rear Panel Sub-Assembly for Automatic and Manual Transmission in Separate Seat Type. Then disconnect the Rear Console Box Assembly that belongs to Separate Seat Type. Start by removing the Instrument Panel Cup Holder Tray as well as the Front Console Box that applies to Automatic and Manual Transmission for Separate and Bench Seats. The holder needs its connectors and three bolts removed after separating it from the Center Air Bag Sensor Assembly. Install the Center Air Bag Sensor Assembly by making sure the ignition switch is OFF along with disconnecting the battery negative terminal first and then hand-tighten the assembly using three bolts to a torque value of 17.5 N.m (179 kgf.cm, 13 ft.lbf). The SRS wiring must have free movement between other components and no contact with pinch points while making sure the sensor assembly has no damage and the waterproof sheet remains correctly placed. The holder needs reconnection using its connectors before installing the Front Console Box followed by the Instrument Panel Cup Holder Tray, Rear Console Box Assembly and Console Upper Rear Panel Sub-Assembly for both transmission types. You must connect the cable to the negative battery terminal using a torque value of 3.9 N.m (40 kgf.cm, 35 in.lbf) after which you should examine the SRS warning light.