OEM 2006 Toyota Tacoma Dimmer Switch

2006 Toyota Tacoma Parts Questions & Experts Answers

• Q: How to remove and install the headlight dimmer switch on 2006 Toyota Tacoma?

  A: Begin the removal process of the headlight dimmer switch by disconnecting the cable from the negative battery terminal then waiting for at least 90 seconds to avoid Air Bag activation. The front wheels should be positioned forward before you detach the No. 2 and No. 3 steering wheel lower covers together with the horn button assembly and steering wheel assembly. The procedure requires the removal of the steering column lower cover then the upper cover before proceeding to separate the spiral cable sub-assembly from the windshield wiper switch assembly. First disconnect the connector and then remove the headlight dimmer switch assembly through the process of disengaging its two securing claws. Installation begins when the headlight dimmer switch assembly is installed by engaging the 2 claws followed by clamping it and reconnecting its connector. Customers should replace all components starting with the windshield wiper switch assembly followed by the spiral cable sub-assembly and finally reinstall the steering column covers while maintaining the spiral cable at center position. The installation process of the steering wheel assembly includes center point and horn button assembly examination followed by the horn button assembly reinstallation. The last procedure requires attaching the cable to the negative battery terminal at 3.9 N.m (40 kgf.cm, 35 in.lbf) then inspecting the SRS warning light before reinstalling the No. 3 and No. 2 steering wheel lower covers.