Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Replaces: 89173-09280
Item Weight: 0.70 Pounds
Item Dimensions: 4.6 x 2.9 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-09270
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front, Upper; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Position: Front
Item Weight: 0.60 Pounds
Item Dimensions: 4.2 x 2.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-02040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 2.7 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-04020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front Left; Air Bag Seat Sensor Mat, Front Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
Position: Front Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.2 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
2005 Toyota Tacoma Air Bag Sensor
Looking for affordable OEM 2005 Toyota Tacoma Air Bag Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Tacoma Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Tacoma Parts Questions & Experts Answers
Q: How to replace the Side Air Bag Sensor Assy LH on 2005 Toyota Tacoma?
A: Service precautions pertaining to Air Bag systems must be followed before starting the replacement of the Side Air Bag Sensor Assy LH. Disconnect the negative cable from the battery terminal while waiting 90 seconds before the Air Bag activation. The installation requires removal of scuff plates from both front and rear doors and Weather Strips from their respective door openings. Alongside these, lap belt anchor covers and center pillar garnish lower pieces from the left-hand side need to come off. The removal of LH side air bag sensor assembly requires first disconnecting the connector and removing its bolt. The inspection of the side air bag sensor assembly LH must be performed with the ignition switch in OFF position while the cable remains disconnected from the negative battery terminal. Operate the side Air Bag sensor assembly LH by screwing it with the bolt and use 9.0 N.m (92 kgf.cm, 80 in.lbf) torque. Check that both the sensor assembly and its connector have been properly installed while inspecting for any damage at the assembly; replace the assembly if you find any dropped condition or defects. Check that SRS wiring flows uninterrupted and avoid pinching because these wires need to remain safe from other parts. Also verify the sensor assembly has no looseness by shaking its parts while avoiding any extra slack. The connector serves to connect to the Air Bag sensor assembly LH before installing lower LH center pillar garnish along with lap belt outer anchor cover with 42 N.m (428 kgf.cm, 31 ft.lbf) torque followed by rear door opening trim Weather Strip LH and front door opening trim Weather Strip LH and rear door scuff plate LH and front door scuff plate LH. End the procedure with negative battery terminal cable installation at 3.9 N.m (40 kgf.cm, 35 in.lbf) followed by inspection of the SRS warning light.