OEM 2006 Toyota Solara Clock Spring

2006 Toyota Solara Parts Questions & Experts Answers

• Q: How do you service and repair the Clock Spring Assembly / Spiral Cable on 2006 Toyota Solara?

  A: A proper repair of the Clock Spring Assembly / Clock Spring begins with disconnecting the negative battery terminal and straightening the front wheels while disconnecting all necessary components. Initialize service on the Clock Spring Assembly / Clock Spring by removing the steering wheel cover lower components No.2 and No.3 then the steering pad and steering wheel assembly using Special Service Tool: 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021). The next step includes removing the two screws from the steering column cover lower section before removing both the steering column cover and clock spring sub-assembly while disconnecting their connectors with caution toward the Air Bag wire harness before unscrewing the 4 screws. The first step for installation includes front wheel straightening and neutral turn signal switching to prevent pin damage before installing the clock spring sub-assembly with 4 screws and connecting its connectors while prioritizing Air Bag connector care. The clock spring sub-assembly needs adjustment following the steps of ignition switch off and battery negative terminal disconnection for 90 seconds minimum before rotating the clock spring counterclockwise until firm then clockwise 2.5 turns to match the marks. Proceed with steering wheel assembly installation before conducting inspection of the steering wheel center point and placement of the steering pad and reconnecting the negative terminal to the battery while initiating Power Window Control System and Sliding Roof System start-up after reconnection. The inspection also comprehends a look at the steering pad while checking the SRS warning light.