How to service the rear upper control arm on 2006 Toyota Land Cruiser?

Service the rear upper control arm by first taking off the wheel while using a torque of 131 Nm (1,340 kgf-cm, 97 ft. lbs.). A supporting jack under the rear axle allows you to remove the rear height control sensor link sub-assembly after matching marks on the height control sensor link and upper control arm and nut removal at 5.6 Nm (57 kgf-cm, 49 inch lbs.). To perform the right-hand side procedures, start by detaching the ABS speed sensor wire harness followed by removing the bolt and heat insulator with a torque of 18 Nm (185 kgf-cm, 13 ft. lbs.) and finishing with removing the 2 nuts, washers, bolts, and upper control arm with a torque of 150 Nm (1,530 kgf-cm, 111 ft. lbs.). Apply new nuts to the installation after you stabilize the suspension then torque them to their proper values. Finish by filling the AHC pump & motor reservoir with suspension fluid AHC and performing the bleeding process for the AHC system while checking for any fluid leakage.

OEM 2006 Toyota Land Cruiser Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arms found

View related parts
2006 Toyota Land Cruiser Arm Assembly, Front Suspension, Upper Driver Side
Part Number: 48630-60010
$344.00 MSRP: $504.14
You Save: $160.14 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48630
- Item Weight: 7.30 Pounds
- Item Dimensions: 12.6 x 7.0 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48630-60010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Land Cruiser Submodels:
- Base | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Land Cruiser Upper Control Arm, Passenger Side
Part Number: 48610-60030
$344.00 MSRP: $504.14
You Save: $160.14 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48610
- Item Weight: 7.30 Pounds
- Item Dimensions: 11.7 x 7.0 x 15.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-60030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Land Cruiser Submodels:
- Base | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Land Cruiser Lower Control Arm, Passenger Side
Part Number: 48620-60010
$322.51 MSRP: $460.47
You Save: $137.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Lower; Control Arm Assembly; Arm Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Position: Lower Passenger Side
- Part Name Code: 48620
- Item Weight: 25.50 Pounds
- Item Dimensions: 19.2 x 2.4 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48620-60010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Land Cruiser Submodels:
- Base | 8 Cyl 4.7 L GAS

2006 Toyota Land Cruiser Control Arm

Looking for affordable OEM 2006 Toyota Land Cruiser Control Arm? Explore our comprehensive catalogue of genuine 2006 Toyota Land Cruiser Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Land Cruiser Parts Questions & Experts Answers

Q: How to service the rear upper control arm on 2006 Toyota Land Cruiser?
A: Service the rear upper control arm by first taking off the wheel while using a torque of 131 Nm (1,340 kgf-cm, 97 ft. lbs.). A supporting jack under the rear axle allows you to remove the rear height control sensor link sub-assembly after matching marks on the height control sensor link and upper control arm and nut removal at 5.6 Nm (57 kgf-cm, 49 inch lbs.). To perform the right-hand side procedures, start by detaching the ABS speed sensor wire harness followed by removing the bolt and heat insulator with a torque of 18 Nm (185 kgf-cm, 13 ft. lbs.) and finishing with removing the 2 nuts, washers, bolts, and upper control arm with a torque of 150 Nm (1,530 kgf-cm, 111 ft. lbs.). Apply new nuts to the installation after you stabilize the suspension then torque them to their proper values. Finish by filling the AHC pump & motor reservoir with suspension fluid AHC and performing the bleeding process for the AHC system while checking for any fluid leakage.