My Garage
Cart
Make sure this part fits

Toyota 48610-60030
Upper Control Arm, Passenger Side

1998-2007 Toyota Land Cruiser 4861060030

Customer Questions & Expert Answers (9)
Toyota 48610-60030 Upper Control Arm, Passenger Side
Toyota 48610-60030 Upper Control Arm, Passenger Side
  • Part Description
    Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly
  • Part Name Code
    48610
  • Position
    Passenger Side
  • Manufacturer
    Toyota
Make sure this part fits
$344.00 MSRP: $504.14
You Save: $160.14 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code48610
    Manufacturer Part Number48610-60030
    Part DescriptionArm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly
    Other NamesArm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
    Item Dimensions11.7 x 7.0 x 15.4 inches
    Item Weight7.30 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU48610-60030
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2007 Toyota Land CruiserBase8 Cyl 4.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 48610-60030 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 48610-60030 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is advisable during the installation of the upper control arm for the 2001 Toyota Land Cruiser? Posted by Customer
    A:
    It is advisable to torque the nuts after stabilizing the suspension during installation.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the used nuts during installation for the 2007 Toyota Land Cruiser? Posted by Customer
    A:
    It is important to replace the 2 used nuts with new ones during installation.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to service the rear upper control arm for the 2006 Toyota Land Cruiser? Posted by Customer
    A:
    Begin by removing the rear wheel, ensuring a torque of 131 Nm (1,340 kgf-cm, 97 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after installing the new bushing for the 2005 Toyota Land Cruiser? Posted by Customer
    A:
    Remove the wire and dust cover, coat the ball joint with grease from the boot kit, and install a new dust cover and wire.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done during the installation of the upper control arm for the 2004 Toyota Land Cruiser? Posted by Customer
    A:
    Stabilize the suspension before torquing the nuts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after removing the rear wheel for the 2000 Toyota Land Cruiser? Posted by Customer
    A:
    Support the rear axle housing with a jack, then disconnect the ABS speed sensor wire harness to remove the upper control arm.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step for replacing the bushings for the 2003 Toyota Land Cruiser? Posted by Customer
    A:
    Start with the No. 1 bushing by prying up the flange with a chisel and hammer, then use Special Service Tool: 09710-30021 (09710-03101), 09950-00020, 09950-00030, 09950-40011 (09957-04010) to remove it, and install a new one using Special Service Tool: 09726-36010 and a press.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the process for removing the lower control arm for the 2002 Toyota Land Cruiser? Posted by Customer
    A:
    Remove the 2 nuts, washers, bolts, and lower control arm, applying a torque of 150 Nm (1,530 kgf-cm, 111 ft. lbs.) during installation after stabilizing the suspension.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 48610-60030, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 48610-60030 Upper Control Arm, Passenger Side. It is sometimes referred to as Toyota Control Arm. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4861060030 Upper Control Arm, Passenger Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery