How to replace the rear Suspension Strut Rod assembly on 2006 Toyota Camry?

Firstly, remove the rear wheel in order to access rear strut rod assembly. Disconnect the cable of the parking brake and the strut rod at the front side. Take out the strut rod on the rear axle carrier. Temporarily tighten the strut rod assembly, stabilize the suspension and tighten the assembly completely. Lastly, put in the back wheel and check alignment.

OEM 2006 Toyota Camry Suspension Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Suspension Strut Rod found

View related parts
2006 Toyota Camry Trailing Arm, Rear
Part Number: 48780-48020
$134.41 MSRP: $190.27
You Save: $55.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Strut Rod
- Position: Rear
- Part Name Code: 48780A
- Item Weight: 2.40 Pounds
- Item Dimensions: 23.1 x 2.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-48020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2006 Toyota Camry Suspension Strut Rod

Looking for affordable OEM 2006 Toyota Camry Suspension Strut Rod? Explore our comprehensive catalogue of genuine 2006 Toyota Camry Suspension Strut Rod. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Camry Suspension Strut Rod Parts Q&A

Q: How to replace the rear Suspension Strut Rod assembly on 2006 Toyota Camry?
A: Firstly, remove the rear wheel in order to access rear strut rod assembly. Disconnect the cable of the parking brake and the strut rod at the front side. Take out the strut rod on the rear axle carrier. Temporarily tighten the strut rod assembly, stabilize the suspension and tighten the assembly completely. Lastly, put in the back wheel and check alignment.