How to replace the Front Wheel Speed Sensor (SPEED SENSOR FRONT LH) on 2005 Toyota Sienna?

A proper replacement of the Front Wheel Speed Sensor (SPEED SENSOR FRONT LH) requires removal of both front wheel and front fender liner LH. The first step involves disconnecting the speed sensor connector and removing the sensor harness with its clamp from the body before removing the two clamp bolts which secure the harness and clamp to the body as well as shock absorber. For sensor replacement of the speed sensor front LH start by removing the bolt while protecting the sensor tip. Fasten the speed sensor front LH with the bolt and tighten it to 8.0 Nm (82 kgf-cm, 71 inch lbs.) while keeping the sensor tip protected. Fasten the sensor harness clamps by screwing in bolts A and B while torquing Bolt A to 8.0 Nm (82 kgf-cm, 71 inch lbs.) and Bolt B to 19 Nm (192 kgf-cm, 14 ft. lbs.). The sensor wire should not be twisted throughout this installation process. After attaching the clamp to the knuckle position one must guide the sensor harness with its clamp onto the body frame where the speed sensor connector can be reconnected. To complete the installation the technician must reinstall the front fender liner LH followed by the front wheel while torquing the wheel to 103 Nm (1,050 kgf-cm, 76 ft. lbs.) before verifying the ABS speed sensor signal.

OEM 2005 Toyota Sienna Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Speed Sensors found

View related parts
2005 Toyota Sienna ABS Sensor, Rear
Part Number: 89544-02020
$215.86 MSRP: $264.73
You Save: $48.87 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Ring; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.2 x 2.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-02020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Toyota Sienna Front Speed Sensor, Driver Side
Part Number: 89543-08030
$271.67 MSRP: $387.88
You Save: $116.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.2 x 6.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Toyota Sienna Rear Speed Sensor, Driver Side
Part Number: 89546-08010
$272.13 MSRP: $388.54
You Save: $116.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Left-Hand; ABS Wheel Speed Sensor; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89546
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.4 x 5.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89546-08010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Toyota Sienna Rear Speed Sensor, Passenger Side
Part Number: 89545-08010
$272.13 MSRP: $388.54
You Save: $116.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Right-Hand; ABS Wheel Speed Sensor; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89545
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.1 x 5.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89545-08010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Toyota Sienna Front Speed Sensor, Passenger Side
Part Number: 89542-08030
$271.67 MSRP: $387.88
You Save: $116.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; ABS Sensor; ABS Sensor Wire; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 1.10 Pounds
- Item Dimensions: 10.3 x 6.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2005 Toyota Sienna Speed Sensor

Looking for affordable OEM 2005 Toyota Sienna Speed Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Sienna Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Sienna Parts Questions & Experts Answers

Q: How to replace the Front Wheel Speed Sensor (SPEED SENSOR FRONT LH) on 2005 Toyota Sienna?
A: A proper replacement of the Front Wheel Speed Sensor (SPEED SENSOR FRONT LH) requires removal of both front wheel and front fender liner LH. The first step involves disconnecting the speed sensor connector and removing the sensor harness with its clamp from the body before removing the two clamp bolts which secure the harness and clamp to the body as well as shock absorber. For sensor replacement of the speed sensor front LH start by removing the bolt while protecting the sensor tip. Fasten the speed sensor front LH with the bolt and tighten it to 8.0 Nm (82 kgf-cm, 71 inch lbs.) while keeping the sensor tip protected. Fasten the sensor harness clamps by screwing in bolts A and B while torquing Bolt A to 8.0 Nm (82 kgf-cm, 71 inch lbs.) and Bolt B to 19 Nm (192 kgf-cm, 14 ft. lbs.). The sensor wire should not be twisted throughout this installation process. After attaching the clamp to the knuckle position one must guide the sensor harness with its clamp onto the body frame where the speed sensor connector can be reconnected. To complete the installation the technician must reinstall the front fender liner LH followed by the front wheel while torquing the wheel to 103 Nm (1,050 kgf-cm, 76 ft. lbs.) before verifying the ABS speed sensor signal.