How to replace the FRONT CONTROL ARM SUB-ASSEMBLY LOWER NO.1 LH on 2005 Toyota Camry?

The first step to replace the FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH requires complete engine assembly and transaxle removal. The procedure for A/T transaxle requires removal of the 3 nuts together with the transverse engine mounting insulator. Start by taking off three nuts and the transverse engine mounting insulator for both M/T transaxle models. Then proceed to disconnect the four bolts and bracket holding the manual transmission. Start by removing the front suspension arm sub-assembly lower No. 1 LH through the front side bolts and rear side bolt followed by nut combination. Detach the front suspension arm sub-assembly lower No. 1 LH and the front lower arm bush stopper. The installation of the new front suspension arm sub-assembly lower No. 1 LH requires first mounting the front lower arm bush stopper and using 2 torques on front bolts to 200 Nm (2,039 kgf-cm, 148 ft. lbs.) and a torque on one rear bolt and nut to 206 Nm (2,101 kgf-cm, 152 ft. lbs.). To install the transverse engine mounting insulator on A/T transaxles secure the 3 nuts with 87 Nm (887 kgf-cm, 64 ft. lbs.) torque and for M/T transaxles attach it with the 4 bolts at 64 Nm (653 kgf-cm, 47 ft. lbs.) before tightening the 3 nuts to 87 Nm (887 kgf-cm, 64 ft. lbs.). The installation sequence includes placing the engine assembly with transaxle as the final step.

OEM 2005 Toyota Camry Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arms found

View related parts
2005 Toyota Camry Control Arm, Lower Driver Side
Part Number: 48069-06100
$162.73 MSRP: $230.36
You Save: $67.63 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm
- Position: Lower Driver Side
- Replaces: 48069-58010, 48069-28120
- Part Name Code: 48069
- Item Weight: 10.60 Pounds
- Item Dimensions: 2.9 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Camry Submodels:
- SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2005 Toyota Camry Control Arm, Passenger Side
Part Number: 48068-06100
$160.38 MSRP: $227.03
You Save: $66.65 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm
- Position: Passenger Side
- Replaces: 48068-28120, 48068-58010
- Part Name Code: 48068
- Item Weight: 7.80 Pounds
- Item Dimensions: 18.2 x 2.8 x 15.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Camry Submodels:
- SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2005 Toyota Camry Control Arm, Lower Driver Side
Part Number: 48069-06070
$181.26 MSRP: $258.80
You Save: $77.54 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm
- Position: Lower Driver Side
- Replaces: 48069-33050
- Part Name Code: 48069
- Item Weight: 7.40 Pounds
- Item Dimensions: 22.4 x 7.1 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Toyota Camry Control Arm, Passenger Side
Part Number: 48068-06070
$181.26 MSRP: $258.80
You Save: $77.54 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm
- Position: Passenger Side
- Replaces: 48068-33050
- Part Name Code: 48068
- Item Weight: 9.30 Pounds
- Item Dimensions: 22.2 x 7.0 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2005 Toyota Camry Control Arm

Looking for affordable OEM 2005 Toyota Camry Control Arm? Explore our comprehensive catalogue of genuine 2005 Toyota Camry Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Camry Parts Questions & Experts Answers

Q: How to replace the FRONT CONTROL ARM SUB-ASSEMBLY LOWER NO.1 LH on 2005 Toyota Camry?
A: The first step to replace the FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH requires complete engine assembly and transaxle removal. The procedure for A/T transaxle requires removal of the 3 nuts together with the transverse engine mounting insulator. Start by taking off three nuts and the transverse engine mounting insulator for both M/T transaxle models. Then proceed to disconnect the four bolts and bracket holding the manual transmission. Start by removing the front suspension arm sub-assembly lower No. 1 LH through the front side bolts and rear side bolt followed by nut combination. Detach the front suspension arm sub-assembly lower No. 1 LH and the front lower arm bush stopper. The installation of the new front suspension arm sub-assembly lower No. 1 LH requires first mounting the front lower arm bush stopper and using 2 torques on front bolts to 200 Nm (2,039 kgf-cm, 148 ft. lbs.) and a torque on one rear bolt and nut to 206 Nm (2,101 kgf-cm, 152 ft. lbs.). To install the transverse engine mounting insulator on A/T transaxles secure the 3 nuts with 87 Nm (887 kgf-cm, 64 ft. lbs.) torque and for M/T transaxles attach it with the 4 bolts at 64 Nm (653 kgf-cm, 47 ft. lbs.) before tightening the 3 nuts to 87 Nm (887 kgf-cm, 64 ft. lbs.). The installation sequence includes placing the engine assembly with transaxle as the final step.