How to replace the Crankshaft Position Sensor on 2004 Toyota Sienna?

The Crankshaft Position Sensor replacement process starts by using a clip remover to remove the front fender apron seal from the right-hand side after which you should remove the 2 bolts and then take out the seal itself. You should disconnect the crankshaft position sensor connector followed by removing its securing bolt before removing the sensor. Torque the new crankshaft position sensor to 8.0 N.m or 80 kgf.cm or 71 in.lbf during installation. Reinstall the front fender apron seal which belongs to the right-hand side of the vehicle.

OEM 2004 Toyota Sienna Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2004 Toyota Sienna Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Part Name Code: 11101E
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 3
- SKU: 90919-T5005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- Base, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Limited, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Toyota Sienna Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Toyota Sienna Crankshaft Position Sensor
Part Number: 90080-19009
$77.72 MSRP: $109.10
You Save: $31.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Part Name Code: 15100R
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19009
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2004 Toyota Sienna Crankshaft Position Sensor

Looking for affordable OEM 2004 Toyota Sienna Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2004 Toyota Sienna Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Sienna Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2004 Toyota Sienna?
A: The Crankshaft Position Sensor replacement process starts by using a clip remover to remove the front fender apron seal from the right-hand side after which you should remove the 2 bolts and then take out the seal itself. You should disconnect the crankshaft position sensor connector followed by removing its securing bolt before removing the sensor. Torque the new crankshaft position sensor to 8.0 N.m or 80 kgf.cm or 71 in.lbf during installation. Reinstall the front fender apron seal which belongs to the right-hand side of the vehicle.