How to replace the No.2 LH Control Arm on 2003 Toyota Camry?

The first step to replace No.2 LH suspension arm is to remove the rear wheel together with the exhaust pipe assembly center and the rear stabilizer bar. Detach both rear suspension arm assembly No.1 LH and No.1 RH through the standard protocol which must be applied identically on each side. Proceed with breaking the rear suspension arm assembly No.2 LH and No.2 RH while applying identical methods that worked on the RH side. Finally you should remove the rear suspension member sub-assembly after splitting off the rear strut rod assembly. Detach the rear suspension arm assembly No.2 LH from its inner side through bolt removal to access the bolt, nut and outer part of the rear suspension arm No.2 which needs removal from the rear axle carrier maintaining constant pressure on the nut when loosening the bolt. The rear suspension arm assembly No.2 LH gets installed by first securing it on the inner side with a bolt for temporary tightness before correctly positioning the part per illustration to achieve full bolt torque of 100 Nm (1,020 kgf-cm, 74 ft. lbs.). First install the rear suspension member sub-assembly followed by temporary tightening of the rear suspension arm assemblies No.1 LH, No.1 RH, No.2 LH, and No.2 RH together with the rear strut rod assembly. Install the rear stabilizer bar followed by suspension stabilization then completely tighten all four rear suspension arm assemblies No.1 LH, No.1 RH, No.2 LH, and No.2 RH as well as the rear strut rod assembly. Conclude your work by attaching the exhaust pipe assembly center along with the rear wheel before torquing the wheel to 103 Nm (1,050 kgf-cm, 76 ft. lbs.) values and checking rear wheel position alignment.

OEM 2003 Toyota Camry Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Control Arms found

View related parts
2003 Toyota Camry Control Arm, Lower Driver Side
Part Number: 48069-06070
$186.50 MSRP: $266.29
You Save: $79.79 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm
- Position: Lower Driver Side
- Replaces: 48069-33050
- Part Name Code: 48069
- Item Weight: 7.40 Pounds
- Item Dimensions: 22.4 x 7.1 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Control Arm, Passenger Side
Part Number: 48068-06070
$193.96 MSRP: $276.93
You Save: $82.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm
- Position: Passenger Side
- Replaces: 48068-33050
- Part Name Code: 48068
- Item Weight: 9.30 Pounds
- Item Dimensions: 22.2 x 7.0 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Control Arm, Rear
Part Number: 48710-33060
$131.95 MSRP: $186.80
You Save: $54.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Rear Suspension; Suspension Control Arm; Lateral Link; Lateral Arm; Front Lateral Arm
- Position: Rear
- Replaces: 48710-06010
- Item Weight: 5.10 Pounds
- Item Dimensions: 1.9 x 1.5 x 1.5 inches
- Condition: New
- SKU: 48710-33060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Lower Control Arm, Driver Side
Part Number: 48069-07030
$193.96 MSRP: $276.93
You Save: $82.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 7.60 Pounds
- Item Dimensions: 19.7 x 3.3 x 15.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-07030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Lower Control Arm, Passenger Side
Part Number: 48068-07030
$193.96 MSRP: $276.93
You Save: $82.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm Assembly; Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 8.10 Pounds
- Item Dimensions: 19.3 x 3.2 x 15.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-07030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2003 Toyota Camry Control Arm

Looking for affordable OEM 2003 Toyota Camry Control Arm? Explore our comprehensive catalogue of genuine 2003 Toyota Camry Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Camry Control Arm Parts Q&A

Q: How to replace the No.2 LH Control Arm on 2003 Toyota Camry?
A: The first step to replace No.2 LH suspension arm is to remove the rear wheel together with the exhaust pipe assembly center and the rear stabilizer bar. Detach both rear suspension arm assembly No.1 LH and No.1 RH through the standard protocol which must be applied identically on each side. Proceed with breaking the rear suspension arm assembly No.2 LH and No.2 RH while applying identical methods that worked on the RH side. Finally you should remove the rear suspension member sub-assembly after splitting off the rear strut rod assembly. Detach the rear suspension arm assembly No.2 LH from its inner side through bolt removal to access the bolt, nut and outer part of the rear suspension arm No.2 which needs removal from the rear axle carrier maintaining constant pressure on the nut when loosening the bolt. The rear suspension arm assembly No.2 LH gets installed by first securing it on the inner side with a bolt for temporary tightness before correctly positioning the part per illustration to achieve full bolt torque of 100 Nm (1,020 kgf-cm, 74 ft. lbs.). First install the rear suspension member sub-assembly followed by temporary tightening of the rear suspension arm assemblies No.1 LH, No.1 RH, No.2 LH, and No.2 RH together with the rear strut rod assembly. Install the rear stabilizer bar followed by suspension stabilization then completely tighten all four rear suspension arm assemblies No.1 LH, No.1 RH, No.2 LH, and No.2 RH as well as the rear strut rod assembly. Conclude your work by attaching the exhaust pipe assembly center along with the rear wheel before torquing the wheel to 103 Nm (1,050 kgf-cm, 76 ft. lbs.) values and checking rear wheel position alignment.