How to Service and Repair a Sway Bar Kit on 2001 Toyota Tacoma?

The sway bar kit repair process begins by removing front wheels that should be mounted with 110 Nm torque (1,150 kgf-cm, 83 ft. lbs.). Begin by removing the sway bar kit when you uninstall both nuts and sway bar link and the two retainers and bushings while torquing the sway bar kit side to 29.5 Nm (300 kgf-cm, 22 ft. lbs.) and the lower arm side to 90 Nm (920 kgf-cm, 66 ft. lbs.). If the ball joint stud turns with the nut apply a hexagon wrench to secure the stud. Repeat this procedure to the other side. Move to the opposite side to successfully remove the sway bar kit together with its components using 29 Nm (300 kgf-cm, 22 ft. lbs.) torque. You should detach the brackets and cushions from the sway bar kit before installation while placing the cushion inside the paint line. The ball joint stud inspection requires flipping the stud at least 5 times while monitoring its movement before applying the nut. Use the torque wrench to apply a smooth 1-turn per period of 2 seconds to 4 seconds while recording the torque measurement on the fifth turn exactly at 0.05 Nm to 2 Nm (0.5 kgf-cm to 20 kgf-cm or 0.4 inch lbs. to 17 inch lbs.). To reinstall the sway bar link ball joint installation must follow the opposite sequence of uninstallation.

OEM 2001 Toyota Tacoma Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Kits found

View related parts
2001 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-AD040
$165.60 MSRP: $234.43
You Save: $68.83 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 8.00 Pounds
- Item Dimensions: 44.2 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AD040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-AD010
$136.96 MSRP: $193.88
You Save: $56.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: OFF ROAD PACKAGE
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.8 x 12.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AD010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-04110
$138.29 MSRP: $195.76
You Save: $57.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Part Name Code: 48811
- Item Weight: 13.10 Pounds
- Item Dimensions: 55.7 x 13.7 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-04110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-04090
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 8.10 Pounds
- Item Dimensions: 42.5 x 12.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-04090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2001 Toyota Tacoma Stabilizer Bar, Rear
Part Number: 48805-AD020
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48805
- Item Weight: 5.10 Pounds
- Item Dimensions: 41.6 x 9.2 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48805-AD020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2001 Toyota Tacoma Sway Bar Kit

Looking for affordable OEM 2001 Toyota Tacoma Sway Bar Kit? Explore our comprehensive catalogue of genuine 2001 Toyota Tacoma Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Tacoma Parts Questions & Experts Answers

Q: How to Service and Repair a Sway Bar Kit on 2001 Toyota Tacoma?
A: The sway bar kit repair process begins by removing front wheels that should be mounted with 110 Nm torque (1,150 kgf-cm, 83 ft. lbs.). Begin by removing the sway bar kit when you uninstall both nuts and sway bar link and the two retainers and bushings while torquing the sway bar kit side to 29.5 Nm (300 kgf-cm, 22 ft. lbs.) and the lower arm side to 90 Nm (920 kgf-cm, 66 ft. lbs.). If the ball joint stud turns with the nut apply a hexagon wrench to secure the stud. Repeat this procedure to the other side. Move to the opposite side to successfully remove the sway bar kit together with its components using 29 Nm (300 kgf-cm, 22 ft. lbs.) torque. You should detach the brackets and cushions from the sway bar kit before installation while placing the cushion inside the paint line. The ball joint stud inspection requires flipping the stud at least 5 times while monitoring its movement before applying the nut. Use the torque wrench to apply a smooth 1-turn per period of 2 seconds to 4 seconds while recording the torque measurement on the fifth turn exactly at 0.05 Nm to 2 Nm (0.5 kgf-cm to 20 kgf-cm or 0.4 inch lbs. to 17 inch lbs.). To reinstall the sway bar link ball joint installation must follow the opposite sequence of uninstallation.