Other Name: Spring Assembly, Rear; Leaf Spring, Rear, Rear Right; Coil Springs; Spring Assembly; Spring Assembly, Rear Passenger Side; Spring Assembly, Rear Driver Side
Manufacturer Note: 4-LEAF,HEAVY DUTY SPRING
Position: Rear
Item Weight: 17.30 Pounds
Item Dimensions: 41.7 x 6.8 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48210-04340
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
Base, DLX, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
Other Name: Spring Assembly, Rear Left-Hand; Leaf Spring, Rear Left; Coil Springs; Spring Assembly; Leaf Spring Assembly; Spring Assembly, Rear Driver Side
Position: Rear Driver Side
Replaces: 48220-04340, 48220-04341
Part Name Code: 48220
Condition: New
Fitment Type: Direct Replacement
SKU: 48220-04342
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
Base, Limited, Pre Runner, SR, SR5, S-Runner, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
Other Name: Spring Assembly, Rear; Leaf Spring, Rear; Coil Springs; Spring Assembly; Spring Assembly, Rear Passenger Side; Spring Assembly, Rear Driver Side
Manufacturer Note: 3-LEAF
Position: Rear
Item Weight: 17.50 Pounds
Item Dimensions: 41.7 x 6.9 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48210-04310
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
Other Name: Spring Assembly, Rear Right-Hand; Leaf Spring, Rear Right; Coil Springs; Spring Assembly; Spring Assembly, Rear Passenger Side
Position: Rear Passenger Side
Part Name Code: 48210
Item Weight: 17.30 Pounds
Item Dimensions: 42.1 x 6.9 x 3.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48210-04130
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
2001 Toyota Tacoma Leaf Spring
Looking for affordable OEM 2001 Toyota Tacoma Leaf Spring? Explore our comprehensive catalogue of genuine 2001 Toyota Tacoma Leaf Spring. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2001 Toyota Tacoma Parts Questions & Experts Answers
Q: How to remove and replace the leaf spring on 2001 Toyota Tacoma?
A: The leaf spring removal process starts with safety stand body support through axle housing lowering and achieving leaf spring tension release from specified models (RZN191L-TRPDKAB, RZN196L-CRPDKAB, PZN196L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB). The first step involves loosening the rear wheel to a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.) before disconnecting the parking brake cable from 4WD models. The first step to disconnect the rear shock absorber involves removing its bolt using 26 Nm torque for 2WD (except pre runner) while 4WD and pre runner require 71 Nm torque. The procedure starts by removing the 4 U-bolt mounting nuts and washers followed by taking off the spring seat and U-bolts with a torque of 123 Nm (1,250 kgf-cm, 90 ft. lbs.). It is essential to check that U-bolts match in length when installing them. The spring bumper needs to be taken out during removal of both 4WD and pre runner. The leaf spring removal begins with applying 157 Nm (1,600 kgf-cm, 116 ft. lbs.) when taking off the nut and washer and bolt from the hanger pin followed by removing the 2 shackle pin mounting nuts and washers with 92 Nm (930 kgf-cm, 67 ft. lbs.) before removing the shackle pin plate and rear leaf spring. The front eye bushing replacement needs Special Service Tool: 09550-10013 (09252-10010, 09553-10010) along with a press for correct bushing setup. Replace rear eye bushings with new components by first cutting both tabs followed by the use of Special Service Tool: 09950-60010 (09951-00350) 09950-70010 (09951-07150) to remove inner tubes and rubber parts. Inner tubes require tapping out with a chisel and hammer while Special Service Tool: 09710-28012 (09710-07062), 09710-30041 (09710-03211) aids in new bushing installation through the press. The leaf spring replacement process starts by using a chisel and hammer to open the spring clip before removing the center bolt under vise-supported spring conditions. The spring clip replacement follows by drilling off the rivet head then installing a new rivet. Then, install the spring center bolt with 44 Nm (450 kgf-cm, 33 ft. lbs.) torque after spring clip bending. When working on 2WD (except pre runner), users must uninstall and reinstall 2 bolts which require 29 Nm (300 kgf-cm, 22 ft. lbs.) torque. After reverse order implementation the installation finishes.