My Garage
Cart
Make sure this part fits

Toyota 90910-AC001
Purge Solenoid, Driver Side

2005-2015 Toyota 90910AC001

Customer Questions & Expert Answers (8)
Toyota 90910-AC001 Purge Solenoid, Driver Side
Toyota 90910-AC001 Purge Solenoid, Driver Side
  • Part Description
    Valve, Duty Vacuum Switching; EGR Vacuum Delay Valve; Vapor Canister Purge Solenoid; Air Injection Check Valve
  • Part Name Code
    17650G
  • Position
    Driver Side
  • Replaces
    90910-12262
  • Manufacturer
    Toyota
Make sure this part fits
$84.21 MSRP: $118.20
You Save: $33.99 (29%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code17650G
    Manufacturer Part Number90910-AC001
    Part DescriptionValve, Duty Vacuum Switching; EGR Vacuum Delay Valve; Vapor Canister Purge Solenoid; Air Injection Check Valve
    Other NamesVacuum Switch; Vacuum Valve; Air Switch Valve; Vacuum Delay Valve
    Manufacturer NoteMEXICO SPEC
    Item Dimensions3.4 x 3.4 x 2.8 inches
    Item Weight0.50 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces90910-12262
    ManufacturerToyota
    SKU90910-AC001
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2010 Toyota 4RunnerSR54 Cyl 2.7 L GAS
    2007-2009 Toyota FJ CruiserBase, Trail Teams Special Edition, TRD Special Edition6 Cyl 4.0 L GAS
    2005-2015 Toyota TacomaBase, Pre Runner, X-Runner4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
    2005-2010 Toyota TundraBase, SR56 Cyl 4.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 90910-AC001 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 90910-AC001 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to service and repair the Canister Purge Valve on Toyota FJ Cruiser? Posted by Customer
    A:
    The first step when servicing or repairing the Canister Purge Valve requires disconnecting the negative battery cable. The first repair step includes disconnecting the V-bank cover as well as the duty vacuum switching valve by conducting connector removal and fuel vapor feed hose detachment and valve separation from the intake air surge tank followed by hose removal of the valve. Before installation attach the vacuum switching valve hose then secure the device using a bolt tightened to 9.0 N.m (92 kgf.cm, 80 in.lbf) and finally connect the vapor feed hose and the connector. Toward the conclusion attach the V-bank cover together with connecting the cable to the negative battery terminal using 3.9 N.m (40 kgf.cm, 35 in.lbf) of torque.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be done after connecting the vapor feed hose for the 2008 Toyota FJ Cruiser? Posted by Customer
    A:
    After that, install the V-bank cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Canister Purge Valve
    Q:
    What should be done before removing the vacuum switching valve for the 2009 Toyota FJ Cruiser? Posted by Customer
    A:
    Disconnect the hose before removing the vacuum switching valve.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Canister Purge Valve
    Q:
    What should be done after turning the ignition switch OFF for the 2008 Toyota Tundra? Posted by Customer
    A:
    Wait at least 90 seconds before disconnecting the cable to allow the navigation system to record memory and settings.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Canister Purge Valve
    Q:
    What is the next step after connecting the hoses and connector for the 2009 Toyota Tundra? Posted by Customer
    A:
    After that, install the V-bank cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Canister Purge Valve
    Q:
    What is the next step after disconnecting the cable for the 2007 Toyota Tundra? Posted by Customer
    A:
    Remove the V-bank cover and the purge VSV by disconnecting its connector, removing the two purge line hoses, and then removing the bolt securing the purge VSV.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Canister Purge Valve
    Q:
    How long should you wait after turning the ignition switch OFF for the 2009 Toyota Tundra? Posted by Customer
    A:
    Wait at least 90 seconds to allow the navigation system to record memory and settings.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Canister Purge Valve
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 90910-AC001, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 90910-AC001 Purge Solenoid, Driver Side. It is sometimes referred to as Toyota Canister Purge Valve. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 90910AC001 Purge Solenoid, Driver Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery