Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 42450-48011
Hub Assembly, Passenger Side

2001-2012 Toyota 4245048011

Customer Questions & Expert Answers (26)
Toyota 42450-48011 Hub Assembly, Passenger Side
  • Part Description
    Hub&Bearing Assembly, Rear Axle; Rear Right Wheel Bearing & Hub; Wheel Hub Repair Kit; Axle Bearing
  • Part Name Code
    42450A
  • Position
    Passenger Side
  • Replaces
    42450-06030, 42450-48010, 42450-06020, 42450-06021, 42450-48020
  • Manufacturer
    Toyota
Make sure this part fits
$483.84 MSRP: $709.07
You Save: $225.23 (32%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 42450-48011 Hub Assembly, Passenger Side is Ref No. 2 in the diagram below

    2002 Toyota Highlander Hub Assembly, Passenger Side Diagram for 42450-48011
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 42450-48011

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code42450A
    Manufacturer Part Number42450-48011
    Part DescriptionHub&Bearing Assembly, Rear Axle; Rear Right Wheel Bearing & Hub; Wheel Hub Repair Kit; Axle Bearing
    Other NamesHub & Bearing Assembly, Rear Axle, Passenger Side; Wheel Bearing and Hub Assembly
    Item Dimensions6.8 x 6.9 x 7.7 inches
    Item Weight9.10 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces42450-06030, 42450-48010, 42450-06020, 42450-06021, 42450-48020
    ManufacturerToyota
    SKU42450-48011
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2012 Toyota AvalonBase, Limited, Touring, XL, XLS6 Cyl 3.5 L GAS
    2002-2011 Toyota CamryBase, CE, Hybrid, LE, SE, XLE4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
    2001-2003 Toyota HighlanderBase, Limited4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
    2004-2008 Toyota SolaraSE, SE Sport, SLE, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 42450-48011 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 42450-48011 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the torque specification for attaching the steering knuckle LH to the shock absorber assembly front LH for the 2006 Toyota Avalon? Posted by Customer
    A:
    Torque to 210 Nm (2,140 kgf-cm, 155 ft. lbs.) while applying engine oil to the threads if reusing bolts and nuts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done if equipped with ABS for the 2003 Toyota Camry? Posted by Customer
    A:
    Disconnect the skid control sensor wire.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step in installing the rear axle hub and bearing assembly for the 2010 Toyota Camry? Posted by Customer
    A:
    Ensure that the skid control sensor is properly integrated as it is a component of the assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    Q:
    What follows the installation of the rear disc for the 2008 Toyota Avalon? Posted by Customer
    A:
    Install the rear disc brake caliper assembly LH, attached with 2 bolts torqued to 62 Nm (632 kgf-cm, 46 ft-lbf), taking care not to twist the brake hose.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the torque specification for installing the new hub and bearing assembly LH for the 2006 Toyota Avalon? Posted by Customer
    A:
    Ensure a torque of 80 Nm (816 kgf-cm, 59 ft. lbs.) when installing the new hub and bearing assembly LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you inspect the rear axle hub bearing for looseness for the 2007 Toyota Avalon? Posted by Customer
    A:
    Use a dial indicator to check near the center of the axle hub, with a maximum allowable looseness of 0.05 mm (0.0020 in.), ensuring the dial indicator is perpendicular to the measurement surface.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    Q:
    What is the first step to install the rear axle hub and bearing assembly for the 2008 Toyota Camry? Posted by Customer
    A:
    Secure it with the 4 bolts, ensuring a torque of 80 Nm (816 kgf-cm, 59 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the final step after installing the rear wheel for the 2010 Toyota Camry? Posted by Customer
    A:
    Connect the skid control sensor connector and check the ABS speed sensor signal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What tools are needed for disassembly for the 2007 Toyota Avalon? Posted by Customer
    A:
    Use a screwdriver, snap ring pliers, and Special Service Tool: 09520-00031.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    Q:
    How do you inspect the bearing backlash for the 2003 Toyota Highlander? Posted by Customer
    A:
    Set a dial indicator near the center of the axle hub; the maximum allowable backlash is 0.05 mm (0.0020 inch).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after installing the rear disc brake caliper assembly for the 2009 Toyota Camry? Posted by Customer
    A:
    Connect the skid control sensor connector again.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the next step after checking the axle hub deviation for the 2002 Toyota Highlander? Posted by Customer
    A:
    Install the rear disc.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    Q:
    What is the next step after inspecting the hub bearing for the 2009 Toyota Avalon? Posted by Customer
    A:
    Install the rear disc.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you remove the inner race from the axle hub for the 2003 Toyota Highlander? Posted by Customer
    A:
    Use Special Service Tool: 09950-00020, 09950-60010 (09951-00410), 09950-70010 (09951-07100) and a press.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    Q:
    What tools are needed to remove the front axle hub LH dust deflector for the 2001 Toyota Highlander? Posted by Customer
    A:
    Use a screwdriver to remove it.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you remove the rear axle hub assembly for the 2003 Toyota Highlander? Posted by Customer
    A:
    Take out the four bolts securing the rear axle hub assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    Q:
    How do you remove the rear axle hub & bearing assembly LH for the 2005 Toyota Camry? Posted by Customer
    A:
    Take out the 4 bolts securing it.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to replace the rear wheel bearing for the 2001 Toyota Highlander? Posted by Customer
    A:
    Remove the rear wheel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you install the front wheel bearing dust deflector for the 2006 Toyota Solara? Posted by Customer
    A:
    Install the front wheel bearing dust deflector No.1 LH with Special Service Tool: 09316-60011 (09316-00011, 09316-00031), 09608-32010 and a hammer, ensuring to align the hole for the speed sensor with the steering knuckle.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    Q:
    What is the installation process for the hub & bearing assy LH for the 2004 Toyota Solara? Posted by Customer
    A:
    Place the hub & bearing assy LH back in position and secure it with the 4 bolts, torquing them to 80 Nm (816 kgf-cm, 59 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you install the rear disc brake caliper assembly LH for the 2005 Toyota Solara? Posted by Customer
    A:
    Use the 2 bolts, torquing them to 62 Nm (630 kgf-cm, 46 ft. lbs.), and attach the rear flexible hose with the bolt, torquing it to 19 Nm (192 kgf-cm, 14 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should you do after installing the hub and bearing assembly for the 2007 Toyota Solara? Posted by Customer
    A:
    Reconnect the skid control sensor, taking care not to twist the sensor wire.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    Q:
    How do you install the rear disc brake caliper assembly for the 2006 Toyota Solara? Posted by Customer
    A:
    Install it with the two bolts, torquing them to 62 Nm (630 kgf-cm, 46 ft. lbs.), and attach the rear flexible hose with the bolt, torquing it to 19 Nm (192 kgf-cm, 14 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the final check to perform after all installations for the 2008 Toyota Solara? Posted by Customer
    A:
    Check the ABS speed sensor signal, using the appropriate test mode procedure for vehicles with or without VSC.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you install the disc brake dust cover front LH for the 2007 Toyota Solara? Posted by Customer
    A:
    Place the disc brake dust cover front LH and torque the 4 bolts to 8.3 Nm (85 kgf-cm, 73 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Hub
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 42450-48011, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 42450-48011 Hub Assembly, Passenger Side. It is sometimes referred to as Toyota Wheel Bearing, Toyota Wheel Hub. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4245048011 Hub Assembly, Passenger Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery