How to install the oil pressure switch assembly on Toyota Venza?

Use TOYOTA Genuine Adhesive 1344 or Three Bond 1344 or another approved equivalent to attach adhesive along 2 to 3 threads of the oil pressure switch but ensure that the adhesive stays away from the oil hole. A 24 mm deep socket wrench should be used for installing the oil pressure switch while tightening it to a torque value of 15 Nm (153 kgf-cm, 11 ft-lbf). Starting the engine before 1 hour of installation completion should be avoided. To finalize the install connect the oil pressure switch connector and check for oil leakage and inspect the engine oil level.

OEM Toyota Venza Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
Toyota Venza Oil Pressure Sensor
Part Number: 83530-0E010
$46.39 MSRP: $64.57
You Save: $18.18 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Oil Pressure; Engine Oil Pressure Switch; Oil Pres Gauge Switch; Pressure Switch; Oil Pressure Sending Unit; Switch; Switch Assembly, Oil Pressure (For Engine); Oil Pressure Switch
- Replaces: 83530-28020, 83530-AA011, 83530-AA010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Venza Oil Pressure Switch

If you're thinking about purchasing OEM parts for your Toyota Venza, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza Oil Pressure Switch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Venza Oil Pressure Switch Parts Questions & Experts Answers

Oil Pressure Sensor
83530-0E010
Q: How to install the oil pressure switch assembly on Toyota Venza?
A: Use TOYOTA Genuine Adhesive 1344 or Three Bond 1344 or another approved equivalent to attach adhesive along 2 to 3 threads of the oil pressure switch but ensure that the adhesive stays away from the oil hole. A 24 mm deep socket wrench should be used for installing the oil pressure switch while tightening it to a torque value of 15 Nm (153 kgf-cm, 11 ft-lbf). Starting the engine before 1 hour of installation completion should be avoided. To finalize the install connect the oil pressure switch connector and check for oil leakage and inspect the engine oil level.