How to install the Fuel Level Sensor assembly on Toyota Venza?

Installation of the fuel level sensor gauge assembly requires fixing the assembly on the fuel tank using 6 bolts at 3.5 Nm torque which does not bend the arm. Mount the sensor gauge, lay down the floor covering with butyl taping and fit in the fuel suction pipe. Re-connect the battery and look out of leaks.

How to replace a Fuel Level Sensor on Toyota Venza?

To loosen the fuel level sensor, release the fuel system pressure, and loosen the negative battery terminal. Take off the fuel suction tube assembly, unplug sensor connector, and slide sensor upwards without touching the resistance plate. Lastly: Unscrew the bolts holding the sensor assembly at the fuel tank.

OEM Toyota Venza Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Level Sensors found

View related parts
Toyota Venza Pressure Sensor
Part Number: 89458-06021
$165.19 MSRP: $233.85
You Save: $68.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor
- Manufacturer Note: (L)
- Replaces: 89458-33041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Gage Assembly, Fuel Sender
Part Number: 83320-0R140
$10.43 MSRP: $14.53
You Save: $4.10 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Level Sensor; Fuel Sending Unit
- Manufacturer Note: (L)
- Replaces: 83320-0R050, 83320-42101
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Fuel Gauge Sending Unit, Driver Side
Part Number: 83320-0T010
$151.92 MSRP: $215.06
You Save: $63.14 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Left Fuel Tank Sending Unit; Fuel Pump Module; Fuel Level Sensor; Sending Unit
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Fuel Gauge Sending Unit, Passenger Side
Part Number: 83320-09170
$173.54 MSRP: $245.66
You Save: $72.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Right Fuel Tank Sending Unit; Fuel Pump Module; Fuel Level Sensor; Sending Unit
- Position: Passenger Side
- Replaces: 83320-09171
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Venza Fuel Level Sensor

If you're thinking about purchasing OEM parts for your Toyota Venza, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza Fuel Level Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Venza Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit, Passenger Side
83320-09170
Q: How to install the Fuel Level Sensor assembly on Toyota Venza?
A: Installation of the fuel level sensor gauge assembly requires fixing the assembly on the fuel tank using 6 bolts at 3.5 Nm torque which does not bend the arm. Mount the sensor gauge, lay down the floor covering with butyl taping and fit in the fuel suction pipe. Re-connect the battery and look out of leaks.
Fuel Gauge Sending Unit, Driver Side
83320-0T010
Q: How to replace a Fuel Level Sensor on Toyota Venza?
A: To loosen the fuel level sensor, release the fuel system pressure, and loosen the negative battery terminal. Take off the fuel suction tube assembly, unplug sensor connector, and slide sensor upwards without touching the resistance plate. Lastly: Unscrew the bolts holding the sensor assembly at the fuel tank.