How to remove the front Sway Bars on Toyota Tacoma?

The removal process of the front Sway Bars for 2WD vehicles starts with wheel removal at the front. The front sway bar link assembly on the left-hand side requires removal of 2 nuts, 2 retainers, 2 cushions as well as the front sway bar link LH; a hexagon (6 mm) wrench might prevent the ball joint from rotating when detaching the nuts. The method to remove the right-hand side matches the steps that were used on the left-hand side. Installment and removal of front sway bar bracket No. 1 LH requires removal of its two bolts and front sway bar bracket followed by performing this procedure on the right-hand side assembly. Finish the operation by removing the front sway bar lower bracket bush LH and the front sway bar lower bracket bush RH then take out the front Sway Bars.

How to install the rear Sway Bars for the Sport Suspension Package on Toyota Tacoma?

The first step to install the Sport Suspension Package's rear Sway Bars requires fitting the 2 sway bar bushes onto the Sway Bars with the bush located at the outer mark of the bar. Connect the Sway Bars along with sway bar brackets through 4 bolts while tightening them to 27 Nm (275 kgf-cm, 20 ft-lbf). When installing the left-hand sway bar link with its dual nuts the torque should be set to 69 Nm (704 kgf-cm, 51 ft-lbf). If the ball joint turns with the nut a 6 mm hexagon wrench should be used to stabilize the stud. You will replicate the installation steps from left-hand to right-hand side. Afterward replace the rear wheel with a torquing torque at 113 Nm (1,152 kgf-cm, 83 ft-lbf) established.

OEM Toyota Tacoma Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Sway Bars found

View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-04130
$169.07 MSRP: $239.34
You Save: $70.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2023 Toyota Tacoma | Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-04100
$186.27 MSRP: $265.95
You Save: $79.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2015 Toyota Tacoma | Base, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-04030
$156.85 MSRP: $222.04
You Save: $65.19 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2000 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Rear Part Number: 48812-AD030
$134.17 MSRP: $189.94
You Save: $55.77 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2015 Toyota Tacoma | Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Bar, Stabilizer, Front Part Number: 48811-AK010
$139.81 MSRP: $197.92
You Save: $58.11 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2024-2025 Toyota Tacoma | Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, TRD Sport | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-04040
$142.28 MSRP: $201.42
You Save: $59.14 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2000 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Bar, Stabilizer, Front Part Number: 48811-AK020
$142.99 MSRP: $202.41
You Save: $59.42 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2024-2025 Toyota Tacoma | Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, TRD Sport | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-04110
$150.04 MSRP: $212.39
You Save: $62.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Tacoma | Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-AD050
$155.79 MSRP: $220.54
You Save: $64.75 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2023 Toyota Tacoma | Base, Pre Runner, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-AD040
$165.60 MSRP: $234.43
You Save: $68.83 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Tacoma | Base, Pre Runner, S-Runner | 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Bar, Stabilizer, Rear Part Number: 48812-AK020
$59.95 MSRP: $84.15
You Save: $24.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2024-2025 Toyota Tacoma | Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, TRD Sport | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
Toyota Tacoma Bar, Stabilizer, Rear Part Number: 48812-AK010
$59.95 MSRP: $84.15
You Save: $24.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: TRD OFFROAD PACKAGE&STABILIZER-WITH(FRONT & REAR)&REAR BUMPER-PAINTED
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2024-2025 Toyota Tacoma | Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, TRD Sport | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
Toyota Tacoma Link Assembly, Rear Stabilizer, Driver Side Part Number: 48840-AK010
$74.88 MSRP: $105.11
You Save: $30.23 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly, Rear Stabilizer
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2024-2025 Toyota Tacoma | Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, TRD Sport | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
Toyota Tacoma Link Assembly, Rear Stabilizer, Passenger Side Part Number: 48830-AK010
$74.88 MSRP: $105.11
You Save: $30.23 (29%)
ADD TO CART
Product Specifications
- Other Name: Link Assembly, Rear Stabilizer
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2024-2025 Toyota Tacoma | Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, TRD Sport | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-AD010
$136.96 MSRP: $193.88
You Save: $56.92 (30%)
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: OFF ROAD PACKAGE
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2004 Toyota Tacoma | Base, DLX, Limited, Pre Runner, S-Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Rear Part Number: 48805-AD020
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Tacoma | Base, Pre Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Stabilizer Bar, Front Part Number: 48811-04090
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Tacoma | Base | 4 Cyl 2.4 L GAS

Toyota Tacoma Sway Bars

Choose genuine Sway Bars that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Sway Bars for your Toyota Tacoma? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tacoma parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Tacoma Sway Bars Parts and Q&A

Stabilizer Bar, Front
48811-04130
Q: How to remove the front Sway Bars on Toyota Tacoma?
A:
The removal process of the front Sway Bars for 2WD vehicles starts with wheel removal at the front. The front sway bar link assembly on the left-hand side requires removal of 2 nuts, 2 retainers, 2 cushions as well as the front sway bar link LH; a hexagon (6 mm) wrench might prevent the Ball Joint from rotating when detaching the nuts. The method to remove the right-hand side matches the steps that were used on the left-hand side. Installment and removal of front sway bar bracket No. 1 LH requires removal of its two bolts and front sway bar bracket followed by performing this procedure on the right-hand side assembly. Finish the operation by removing the front sway bar lower bracket bush LH and the front sway bar lower bracket bush RH then take out the front Sway Bars.
Stabilizer Bar, Rear
48812-AD030
Q: How to install the rear Sway Bars for the Sport Suspension Package on Toyota Tacoma?
A:
The first step to install the Sport Suspension Package's rear Sway Bars requires fitting the 2 sway bar bushes onto the Sway Bars with the bush located at the outer mark of the bar. Connect the Sway Bars along with sway bar brackets through 4 bolts while tightening them to 27 Nm (275 kgf-cm, 20 ft-lbf). When installing the left-hand sway bar link with its dual nuts the torque should be set to 69 Nm (704 kgf-cm, 51 ft-lbf). If the Ball Joint turns with the nut a 6 mm hexagon wrench should be used to stabilize the stud. You will replicate the installation steps from left-hand to right-hand side. Afterward replace the rear wheel with a torquing torque at 113 Nm (1,152 kgf-cm, 83 ft-lbf) established.