Secure the heated oxygen sensor for Bank 1 Sensor 2 to the front
Exhaust Pipe by means of Special Service Tool: 09224-00010 and achieve a torque of 40 Nm (408 kgf-cm, 30 ft-lbf) if using the tool or 44 Nm (449 kgf-cm, 32 ft-lbf) when not using it. A torque wrench should have a 300 mm (11.8 in.) fulcrum length while maintaining tool and wrench alignment in a direct line. After sensor installation connect its connector and check for exhaust gas leaks.