How to remove the Camshaft Position Sensor on Toyota RAV4?

The first step to replace the Camshaft Position Sensor in a 2AZ-FE engine control system requires disconnecting the negative battery cable for a minimum of ninety seconds to avoid triggering Air Bag and seat belt pretensioners. Follow this step by taking off the No. 1 engine cover followed by removal of the air cleaner cap. The sensor connector should be disconnected followed by removal of the bolt and sensor.

How to install the Camshaft Position Sensor for the Exhaust Side and the Intake Side on Toyota RAV4?

The first step for installing the Exhaust Side Camshaft Position Sensor includes applying engine oil to its O-ring while inspecting it for damage and any sign of lockage. Use Toyota Genuine Adhesive 1344 or Three Bond 1344 or its equivalent to apply adhesive to two or three threads of the bolt. Begin sensor installation by screwing the bolt then tight it to 10 Nm (102 kgf-cm, 7 ft-lbf) before attaching the sensor connector. The process for the Intake Side mirrors the Exhaust Side procedure by applying engine oil to the O-ring followed by adhesive on bolt threads then installing the sensor with the same torque level and finishing with sensor connector attachment. Perform an inspection for oil leakage after completing the installation steps. Place the No. 1 Engine Cover Sub-Assembly as the final step of the procedure.

OEM Toyota RAV4 Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Camshaft Position Sensors found

View related parts
Toyota RAV4 Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2008, 2001-2003 Toyota RAV4 | Base, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota RAV4 Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2018 Toyota RAV4 | Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota RAV4 Camshaft Position Sensor
Part Number: 19300-03010
$152.27 MSRP: $215.55
You Save: $63.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Cam Position; Engine Camshaft Position Sensor; Camshaft Sensor
- Manufacturer Note: (L)
- Replaces: 19300-74010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2000 Toyota RAV4 | Base | 4 Cyl 2.0 L GAS
View related parts
Toyota RAV4 Sensor, Camshaft Position
Part Number: 90919-A5007
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Sensor, Cam Position; Engine Camshaft Position Sensor
- Replaces: 90919-05096
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2023 Toyota RAV4 | Adventure, Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE, LE, Limited, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS

Toyota RAV4 Camshaft Position Sensor

Choose genuine Camshaft Position Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Camshaft Position Sensor for your Toyota RAV4? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota RAV4 parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota RAV4 Camshaft Position Sensor Parts and Q&A

Sensor, Camshaft Position
90080-19014
Q: How to remove the Camshaft Position Sensor on Toyota RAV4?
A:
The first step to replace the Camshaft Position Sensor in a 2AZ-FE engine control system requires disconnecting the negative battery cable for a minimum of ninety seconds to avoid triggering Air Bag and seat belt pretensioners. Follow this step by taking off the No. 1 engine cover followed by removal of the air cleaner cap. The sensor connector should be disconnected followed by removal of the bolt and sensor.
Camshaft Position Sensor, Driver Side
90919-T5005
Q: How to install the Camshaft Position Sensor for the Exhaust Side and the Intake Side on Toyota RAV4?
A:
The first step for installing the Exhaust Side Camshaft Position Sensor includes applying engine oil to its O-ring while inspecting it for damage and any sign of lockage. Use Toyota Genuine Adhesive 1344 or Three Bond 1344 or its equivalent to apply adhesive to two or three threads of the bolt. Begin sensor installation by screwing the bolt then tight it to 10 Nm (102 kgf-cm, 7 ft-lbf) before attaching the sensor connector. The process for the Intake Side mirrors the Exhaust Side procedure by applying engine oil to the O-ring followed by adhesive on bolt threads then installing the sensor with the same torque level and finishing with sensor connector attachment. Perform an inspection for oil leakage after completing the installation steps. Place the No. 1 Engine Cover Sub-Assembly as the final step of the procedure.