How to remove the Fuel Pressure Regulator on Toyota RAV4?

It is necessary to start the removal process of the Fuel Pressure Pulsation Damper for the 2AR-FE engine by draining fuel system pressure. Disconnect the battery cable from the minus terminal of the battery to disable the SRS system before allowing at least 90 seconds to elapse. The next step involves taking apart the No. 1 engine cover sub-assembly with the air cleaner cap sub-assembly. Prevent bends or kinks and flattening of the fuel tube sub-assembly when you detach it from the fuel hose clamp followed by removing the No. 2 fuel pipe clamp. To disconnect the fuel tube connector use Special Service Tool: 09268-21010 by inserting the retainer into the connector's inside edge and matching it with the tool's chamfered section before pushing the connector onto the tool until it clicks. Dispose of remaining fuel from the tube before you place plastic bags on the exposed parts. Players must first remove No. 1 fuel pipe clamp and pinch the tube connector before pulling it off the pipe while inspecting the connector area carefully for foreign matter which could decrease O-ring seal performance. You should never use tools for disconnecting the connector and pipe section yet you can softly pinch then turn the connector if it remains stuck. The process of assembly termination includes the removal of the fuel pressure pulsation damper assembly's two bolts as well as the damper for extraction of the O-ring from the damper.

How to Install the Fuel Pressure Regulator on Toyota RAV4?

Before installing the new O-rings on the fuel pressure regulator you should apply a light gasoline layer to them. Attach the fuel pressure regulator to the fuel filter after application of a thin gasoline layer to the 2 O-rings. Begin with the fuel pump assembly installation after the fuel pressure regulator assembly.

OEM Toyota RAV4 Fuel Pressure Regulator

Fuel Tank Pressure Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Fuel Pressure Regulators found

View related parts
Toyota RAV4 Damper Assembly, Fuel Pressure Pulsation
Part Number: 23270-31140
$111.14 MSRP: $156.01
You Save: $44.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Pressure Damper; Fuel Pump Pulsator
- Replaces: 23270-31080, 23270-31010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2008 Toyota RAV4 | Base, Limited, Sport | 6 Cyl 3.5 L GAS
View related parts
Toyota RAV4 Damper
Part Number: 23270-28021
$190.00 MSRP: $271.28
You Save: $81.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper Assembly, Fuel Pressure Pulsation; Fuel Pressure Damper
- Replaces: 23270-28020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota RAV4 | Base, L, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota RAV4 Damper Set, Fuel Pressure Pulsation
Part Number: 23207-20011
$93.01 MSRP: $130.55
You Save: $37.54 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: DAMPER SET, FUEL PRE; Fuel Pressure Damper; Fuel Pump Pulsator
- Replaces: 23207-46010, 23270-62010, 23270-62011, 23207-20010, 23207-74010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2000 Toyota RAV4 | Base | 4 Cyl 2.0 L GAS
View related parts
Toyota RAV4 Fuel Pressure Regulator
Part Number: 23280-21010
$80.57 MSRP: $113.09
You Save: $32.52 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2018 Toyota RAV4 | Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota RAV4 Damper
Part Number: 23270-36031
$111.14 MSRP: $156.01
You Save: $44.87 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper Assembly, Fuel Pressure Pulsation; Fuel Pressure Damper
- Replaces: 23270-36010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2018 Toyota RAV4 | Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Toyota RAV4 Fuel Pressure Regulator
Part Number: 23020-28010
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Regulator; Regulator Assembly, Fuel Pressure W/Jet Pump; Pressure Regulator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota RAV4 | Base, L, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota RAV4 Pressure Regulator
Part Number: 23070-25020
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Fuel Main; Fuel Injection Pressure Regulator; Fuel Pressure Regulator
- Manufacturer Note: MARK 23070-25020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2023 Toyota RAV4 | Adventure, Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE, LE, Limited, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Toyota RAV4 Fuel Pressure Regulator
Part Number: 23270-28052
$168.13 MSRP: $238.01
You Save: $69.88 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper Assembly, Fuel Pressure Pulsation; Fuel Pressure Damper; Damper
- Replaces: 23270-28050, 23270-28051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2008 Toyota RAV4 | Base, Limited, Sport | 4 Cyl 2.4 L GAS
View related parts
Toyota RAV4 Fuel Pressure Regulator
Part Number: 23280-74160
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Regulator; Regulator Assembly, Fuel Pressure; Pressure Regulator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2000 Toyota RAV4 | Base | 4 Cyl 2.0 L GAS

Toyota RAV4 Fuel Pressure Regulator

Choose genuine Fuel Pressure Regulator that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Fuel Pressure Regulator for your Toyota RAV4? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota RAV4 parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Fuel Pressure Regulator is a really important component in the Toyota RAV4 range which governs fuel pressure levels in the electronic fuel injection systems. This is normally installed at the fuel rail and function on the spring and diaphragm system that controls fuel delivery on the basis of engine vacuum. During non-use, this causes a higher vacuum, thus a higher flow back of fuel whereas during usage, it decrease this vacuum, preventing it from robbing pressure that the engine needs. Years of RAV4 models have incorporated pressure reducing and back-pressure regulators as their fuel pressure regulators. The primary distinction lies in their operational mechanisms: There are two main kinds of pressure regulators: pressure reducing regulators that reduces the input pressure and back-pressure regulators that maintains the inlet pressure. Although OEM regulators are proficient under normal operation, changes for instance raising the injectors' size or installing high volume pumps may require adjustable after market models for efficiency.

Toyota RAV4 Fuel Pressure Regulator Parts and Q&A

Fuel Pressure Regulator
23280-21010
Q: How to remove the Fuel Pressure Regulator on Toyota RAV4?
A:
It is necessary to start the removal process of the Fuel Pressure Pulsation Damper for the 2AR-FE engine by draining fuel system pressure. Disconnect the battery cable from the minus terminal of the battery to disable the SRS system before allowing at least 90 seconds to elapse. The next step involves taking apart the No. 1 engine cover sub-assembly with the air cleaner cap sub-assembly. Prevent bends or kinks and flattening of the fuel tube sub-assembly when you detach it from the fuel hose clamp followed by removing the No. 2 fuel pipe clamp. To disconnect the fuel tube connector use Special Service Tool: 09268-21010 by inserting the retainer into the connector's inside edge and matching it with the tool's chamfered section before pushing the connector onto the tool until it clicks. Dispose of remaining fuel from the tube before you place plastic bags on the exposed parts. Players must first remove No. 1 fuel pipe clamp and pinch the tube connector before pulling it off the pipe while inspecting the connector area carefully for foreign matter which could decrease O-ring seal performance. You should never use tools for disconnecting the connector and pipe section yet you can softly pinch then turn the connector if it remains stuck. The process of assembly termination includes the removal of the fuel pressure pulsation damper assembly's two bolts as well as the damper for extraction of the O-ring from the damper.
Damper
23270-36031
Q: How to Install the Fuel Pressure Regulator on Toyota RAV4?
A:
Before installing the new O-rings on the fuel pressure regulator you should apply a light gasoline layer to them. Attach the fuel pressure regulator to the fuel filter after application of a thin gasoline layer to the 2 O-rings. Begin with the Fuel Pump assembly installation after the fuel pressure regulator assembly.