How to install the ignition switch assembly on Toyota Matrix?

Installation of 1ZZ-FE ignition switch assembly requires fixing the part with 2 screws, hooking up the wire harness, and the unlock warning switch connector. Next, attach the ignition switch connector and unlock warning connector. Fit the cover on the lower steering column using 3 screws and then reconnect the battery negative terminal at 5.4 Nm.

How to replace the Ignition Switch or starter switch assembly on Toyota Matrix?

In order to change the ignition or starter switch assembly, you need to disconnect the battery negative terminal, remove lower steering column cover and unconnect the required connectors. Take out the ignition switch assembly, followed by the installation of a new one, and connect the connectors, and data cover, and reconnect the battery, making sure that the torque is 5.4 N. m.

OEM Toyota Matrix Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Switches found

View related parts
Toyota Matrix Position Sensor
Part Number: 84052-71010
$65.52 MSRP: $91.97
You Save: $26.45 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Matrix | Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Matrix Lock Switch
Part Number: 84052-60010
$30.10 MSRP: $41.90
You Save: $11.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Warning Switch; Ignition Switch; Warning Switch; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Matrix Ignition Switch
Part Number: 84450-52010
$113.75 MSRP: $159.67
You Save: $45.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Replaces: 84450-BZ040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Matrix Ignition Switch
Part Number: 84450-12200
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Ignition Starter Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Matrix | Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS

Toyota Matrix Ignition Switch

If you're thinking about purchasing OEM parts for your Toyota Matrix, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Matrix Ignition Switch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Matrix Ignition Switch Parts and Q&A

Ignition Switch
84450-52010
Q: How to install the ignition switch assembly on Toyota Matrix?
A: Installation of 1ZZ-FE ignition switch assembly requires fixing the part with 2 screws, hooking up the wire harness, and the unlock warning switch connector. Next, attach the ignition switch connector and unlock warning connector. Fit the cover on the lower steering column using 3 screws and then reconnect the battery negative terminal at 5.4 Nm.
Lock Switch
84052-60010
Q: How to replace the Ignition Switch or starter switch assembly on Toyota Matrix?
A: In order to change the ignition or starter switch assembly, you need to disconnect the battery negative terminal, remove lower steering column cover and unconnect the required connectors. Take out the ignition switch assembly, followed by the installation of a new one, and connect the connectors, and data cover, and reconnect the battery, making sure that the torque is 5.4 N. m.