How to install the Clock Spring and ensure proper alignment with the steering angle sensor on Toyota Highlander?

The installation of the clock spring requires users to join it to the steering angle sensor by inserting the six claws and two pins. Check that the wheels face forward directly and disable the turn signal switch to prevent breaking the pin. For filling the clock spring with the steering angle sensor you should use three claws while taking out the lock pin in case you need to put in a new cable before installing the steering wheel assembly. When connecting the connectors to the clock spring with the steering angle sensor avoid any damage to the Air Bag wire harness. Install the steering column cover as the following procedure. Perform clock spring adjustments only after disconnecting the battery negative cable (-) and waiting 90 seconds to avoid Air Bag deployment. To align the marks use a counterclockwise clock spring rotation until it stops and then follow with a clockwise turning of approximately 2.5 turns but avoid making these adjustments with the Air Bag wire harness. Proceed with the installation of the steering wheel assembly by first checking the steering wheel center point while subsequently adding the steering pad followed by lower No. 3 and lower No. 2 steering wheel covers. After connecting the cable to the negative terminal verify that the systems require initialization for reconnection while checking the steering pad along with SRS warning light operation.

How to remove the Clock Spring Assembly / Spiral Cable on Toyota Highlander?

Reading all the safety recommendations is necessary for servicing the Clock Spring Assembly / Clock Spring. You should position the front wheels toward the front and disconnect the negative cable from the battery terminal for at least 90 seconds to stop Air Bag deployment. Users must note that a few systems request system initialization upon reattaching the cable. Start by taking off the lower No. 3 steering wheel cover after which uninstall the lower No. 2 steering wheel cover then remove the steering pad piece. The procedure requires steering wheel assembly removal together with the steering column cover after initial steps. Unplug the clock spring sensor by disconnecting its connectors and preserve the Air Bag wire harness from damage while carrying out the removal process. The next step is to remove the clock spring with steering angle sensor after disengaging the 3 claws. Finally, the removal of the clock spring from the steering angle sensor requires disengaging the 6 claws and 2 pins.

OEM Toyota Highlander Clock Spring

Spiral Cable Clock Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Clock Springs found

View related parts
Toyota Highlander Clockspring
Part Number: 84306-04080
$147.69 MSRP: $209.07
You Save: $61.38 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2012 Toyota Highlander | Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84308-0E120
$245.57 MSRP: $350.62
You Save: $105.05 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Set, Spiral W/; Air Bag Clockspring; Cable Sub-Assembly, Spiral
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84308-0E080
$268.40 MSRP: $383.22
You Save: $114.82 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Set, Spiral W/; Air Bag Clockspring; Cable Sub-Assembly, Spiral
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84306-48040
$347.07 MSRP: $508.63
You Save: $161.56 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Highlander | Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84306-32030
$326.54 MSRP: $466.22
You Save: $139.68 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Manufacturer Note: W(CRUISE CONTROL)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84306-22010
$273.65 MSRP: $390.71
You Save: $117.06 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Manufacturer Note: MEXICO SPEC
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Highlander | Base | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Angle Sensor
Part Number: 84306-0E010
$241.49 MSRP: $344.80
You Save: $103.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Steering Wheel Position Sensor; Air Bag Clockspring; Clockspring; Cable Sub-Assembly, Spiral W/Sensor
- Replaces: 84306-48030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2013 Toyota Highlander | Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84307-0E190
$467.04 MSRP: $684.46
You Save: $217.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring; Cable Sub-Assembly, Spiral W/Sensor
- Replaces: 84307-0E090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84308-0R030
$300.33 MSRP: $428.79
You Save: $128.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Set, Spiral W/; Air Bag Clockspring; Cable Sub-Assembly, Spiral
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84308-02130
$268.40 MSRP: $383.22
You Save: $114.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Set, Spiral W/; Air Bag Clockspring; Cable Sub-Assembly, Spiral
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84307-0E100
$463.86 MSRP: $679.80
You Save: $215.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring; Cable Sub-Assembly, Spiral W/Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clockspring
Part Number: 84306-48020
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Manufacturer Note: W(VSC)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Toyota Highlander Clock Spring

Choose genuine Clock Spring that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Clock Spring for your Toyota Highlander? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Highlander Clock Spring Parts and Q&A

Angle Sensor
84306-0E010
Q: How to install the Clock Spring and ensure proper alignment with the steering angle sensor on Toyota Highlander?
A:
The installation of the clock spring requires users to join it to the Steering Angle Sensor by inserting the six claws and two pins. Check that the wheels face forward directly and disable the turn signal switch to prevent breaking the pin. For filling the clock spring with the steering angle sensor you should use three claws while taking out the lock pin in case you need to put in a new cable before installing the Steering Wheel assembly. When connecting the connectors to the clock spring with the steering angle sensor avoid any damage to the Air Bag wire harness. Install the steering column cover as the following procedure. Perform clock spring adjustments only after disconnecting the battery negative cable (-) and waiting 90 seconds to avoid Air Bag deployment. To align the marks use a counterclockwise clock spring rotation until it stops and then follow with a clockwise turning of approximately 2.5 turns but avoid making these adjustments with the Air Bag wire harness. Proceed with the installation of the steering wheel assembly by first checking the steering wheel center point while subsequently adding the steering pad followed by lower No. 3 and lower No. 2 steering wheel covers. After connecting the cable to the negative terminal verify that the systems require initialization for reconnection while checking the steering pad along with SRS warning light operation.
Clockspring
84306-22010
Q: How to remove the Clock Spring Assembly / Spiral Cable on Toyota Highlander?
A:
Reading all the safety recommendations is necessary for servicing the Clock Spring Assembly / Clock Spring. You should position the front wheels toward the front and disconnect the negative cable from the battery terminal for at least 90 seconds to stop Air Bag deployment. Users must note that a few systems request system initialization upon reattaching the cable. Start by taking off the lower No. 3 Steering Wheel cover after which uninstall the lower No. 2 steering wheel cover then remove the steering pad piece. The procedure requires steering wheel assembly removal together with the steering column cover after initial steps. Unplug the clock spring sensor by disconnecting its connectors and preserve the Air Bag wire harness from damage while carrying out the removal process. The next step is to remove the clock spring with Steering Angle Sensor after disengaging the 3 claws. Finally, the removal of the clock spring from the steering angle sensor requires disengaging the 6 claws and 2 pins.

Related Toyota Highlander Parts

Browse Toyota Highlander Clock Spring by Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001