How to Properly Install an Ignition Switch Assembly on Toyota Corolla?

Begin installation of the ignition switch assembly by using the 2 screws to fasten it while connecting the connector. First install the upper steering column cover then apply the lower steering column cover on top. First adjust the spiral cable and install both the steering wheel assembly with the steering pad. The installation process continues with lower No. 3 steering wheel cover and lower No. 2 steering wheel cover. After checking the middle of the steering wheel connect the cable to the negative battery terminal. Conclude the inspection by looking at the steering pad before checking the SRS warning light.

How to Remove the Ignition Switch Safely on Toyota Corolla?

The removal process of an ignition switch starts with disconnecting the negative battery terminal cable before waiting 90 seconds to activate the SRS system shutdown. The technician should start by removing the lower instrument panel finish panel LH then proceed to remove the instrument panel finish panel end LH. The first step is to remove the instrument cluster finish panel assembly along with the second No. 2 instrument panel under cover sub-assembly including the Instrument Panel Under Cover. The service procedure starts with elimination of both lower instrument panel finish panel sub-assembly and No. 1 switch hole base. The engine switch can now be taken from the No. 1 switch hole base by releasing its two claws.

OEM Toyota Corolla Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Ignition Switches found

View related parts
Toyota Corolla Position Sensor
Part Number: 84052-71010
$65.52 MSRP: $91.97
You Save: $26.45 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2023 Toyota Corolla | 50th Anniversary Special Edition, Base, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, LE Eco, Le Eco Plus, S, SE, SE Apex, SE Nightshade, Special Edition, XLE, XRS, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Lock Switch
Part Number: 84052-60010
$30.10 MSRP: $41.90
You Save: $11.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Warning Switch; Ignition Switch; Warning Switch; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Corolla | CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Warning Switch
Part Number: 84052-12070
$27.23 MSRP: $37.91
You Save: $10.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Warning Switch; Switch
- Manufacturer Note: STEERING CORUMN
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2002 Toyota Corolla | CE, LE, S, VE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Ignition Switch
Part Number: 84450-52010
$113.75 MSRP: $159.67
You Save: $45.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Replaces: 84450-BZ040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Corolla | CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Ignition Switch
Part Number: 84450-12200
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Ignition Starter Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013, 1998-2002 Toyota Corolla | Base, CE, L, LE, S, VE, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Ignition Switch
Part Number: 84450-20260
$127.95 MSRP: $181.12
You Save: $53.17 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1997 Toyota Corolla | Base, CE, DX, LE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Ignition Switch
Part Number: 84450-12160
$118.49 MSRP: $166.32
You Save: $47.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1992 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5 | 4 Cyl 1.6 L GAS
View related parts
Toyota Corolla Ignition Switch
Part Number: 84450-0R010
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Replaces: 84450-02040, 84450-12320
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Corolla | 50th Anniversary Special Edition, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Ignition Switch
Part Number: 84450-06050
$90.76 MSRP: $127.40
You Save: $36.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Ignition Switch Actuator
- Replaces: 84450-33040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Corolla | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Ignition Switch
Part Number: 84450-12170
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1992 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
View related parts
Toyota Corolla Ignition Switch
Part Number: 84450-12130
Product Specifications
- Other Name: SWITCH ASSY, IGNITIO; Switch Assembly, Ignition Or Starter
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1988 Toyota Corolla | DLX, FX, FX16, FX16 GTS, LE, LE Limited, Sport DLX, Sport GTS, Sport SR5 | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L DIESEL

Toyota Corolla Ignition Switch

Choose genuine Ignition Switch that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Ignition Switch for your Toyota Corolla? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Corolla Ignition Switch Parts and Q&A

Position Sensor
84052-71010
Q: How to Properly Install an Ignition Switch Assembly on Toyota Corolla?
A:
Begin installation of the ignition switch assembly by using the 2 screws to fasten it while connecting the connector. First install the upper steering column cover then apply the lower steering column cover on top. First adjust the spiral cable and install both the Steering Wheel assembly with the steering pad. The installation process continues with lower No. 3 steering wheel cover and lower No. 2 steering wheel cover. After checking the middle of the steering wheel connect the cable to the negative battery terminal. Conclude the inspection by looking at the steering pad before checking the SRS warning light.
Ignition Switch
84450-12200
Q: How to Remove the Ignition Switch Safely on Toyota Corolla?
A:
The removal process of an ignition switch starts with disconnecting the negative battery terminal cable before waiting 90 seconds to activate the SRS system shutdown. The technician should start by removing the lower instrument panel finish panel LH then proceed to remove the instrument panel finish panel end LH. The first step is to remove the instrument cluster finish panel assembly along with the second No. 2 instrument panel under cover sub-assembly including the Instrument Panel Under Cover. The service procedure starts with elimination of both lower instrument panel finish panel sub-assembly and No. 1 switch hole base. The engine switch can now be taken from the No. 1 switch hole base by releasing its two claws.