How to remove the throttle body on Toyota 4Runner?

The procedure starts with disconnecting the cable from the negative terminal of the battery. Next, drain the engine coolant. The first step involves removing V-bank cover through the process of taking out its 2 securing nuts. Uninstall the air cleaner assembly by detaching ventilation hose No. 2 and the vacuum hose then removing the mass air flow meter connector followed by clipping the 2 wire harness clamps and unfastening the 2 hose clamps before taking out the air cleaner assembly using its 2 bolts. The maintenance continues with disconnecting throttle motor connector together with water by-pass hose No. 5 and water by-pass hose No. 4. Remove the throttle with motor body assembly and gasket by eliminating the 4 bolts in the final step.

How to install the throttle body with motor assembly on Toyota 4Runner?

The procedure to mount the throttle body with motor assembly onto the 1GR-FE engine control system begins with installing a new gasket then bolt the motor body to the throttle using 4 bolts which require 11 Nm (112 kgf-cm, 9 ft-lbf) torque. Integrate the water by-pass hoses No. 4 and No. 5 after connecting the throttle motor connector. Fasten the air cleaner assembly by using two bolts at 8.0 Nm torque setting then tighten the two hose clamps. Position the 2 wire harness clamps then link the mass air flow meter connector with the vacuum hose and ventilation hose No. 2. For the next step use a cable to connect with the negative battery terminal before tightening it at 3.9 Nm (40 kgf-cm, 35 in-lbf). After adding coolant it is essential to inspect the area for fluid leaks in any region. Fasten the V-bank cover with 2 nuts then tighten them to 7.5 Nm (76 kgf-cm, 66 in-lbf).

OEM Toyota 4Runner Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Throttle Bodies found

View related parts
Toyota 4Runner Throttle Body
Part Number: 22030-0F010
$376.13 MSRP: $551.22
You Save: $175.09 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle; Fuel Injection Throttle Body Assembly; Fuel Injection ETB Assembly; Body Assembly, Throttle W/Throttle Position Sensor
- Manufacturer Note: (L)
- Replaces: 22030-50200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2009 Toyota 4Runner | Limited, Sport, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22030-0P010
$338.30 MSRP: $483.03
You Save: $144.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle; Fuel Injection Throttle Body; ETB Assembly; Body Assembly, Throttle W/Throttle Position Sensor
- Replaces: 22030-31010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-62220
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-62210
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2000 Toyota 4Runner | Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-75220
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2000 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-62230
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-1998 Toyota 4Runner | Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-75190
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-35260
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1988 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-35301
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-62240
Product Specifications
- Other Name: Body Assembly, Throttle
- Manufacturer Note: MARK 62240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-1998 Toyota 4Runner | Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-35210
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1988 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-35230
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1988 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-35250
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1990 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-35311
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-35320
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1994 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-61010
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1994 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-65031
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990 Toyota 4Runner | SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-65052
Product Specifications
- Other Name: Body Assembly, Throttle
- Manufacturer Note: W(CRUISE CONTROL)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1991 Toyota 4Runner | SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-65062
Product Specifications
- Other Name: Body Assembly, Throttle
- Manufacturer Note: W(CRUISE CONTROL)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991 Toyota 4Runner | SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Throttle Body
Part Number: 22210-75200
Product Specifications
- Other Name: Body Assembly, Throttle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS

| Page 1 of 2 |Next >

1-20 of 28 Results

Toyota 4Runner Throttle Body

Choose genuine Throttle Body that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Throttle Body for your Toyota 4Runner? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Throttle Body is a mechanism of the complete air intake system within Toyota 4Runner automobiles that assists in the management of the amount of air that flows into the engine. The control is made using a butterfly valve that stands open and shut by the driver's accelerator action. This occurs especially where the valve shaft has been exposed to dirt and grimes that affect its efficiency making the car to be less fuel efficient and sluggish. So cleansing or even replacing the throttle body can be used to correct the efficiency of the air-fuel mixture and drive the engine. In cars with fuel injection, the role of the throttle body is of maintaining correct air fuel mixture with some cars even featuring electronic throttle control for better tuning. Furthermore, special cars can use several throttle bodies to prevent the airflow velocity decrease and to increase the response time.

Toyota 4Runner Throttle Body Parts and Q&A

Throttle Body
22030-0F010
Q: How to remove the throttle body on Toyota 4Runner?
A:
The procedure starts with disconnecting the cable from the negative terminal of the battery. Next, drain the engine coolant. The first step involves removing V-bank cover through the process of taking out its 2 securing nuts. Uninstall the air cleaner assembly by detaching ventilation hose No. 2 and the vacuum hose then removing the mass air flow meter connector followed by clipping the 2 wire harness clamps and unfastening the 2 hose clamps before taking out the air cleaner assembly using its 2 bolts. The maintenance continues with disconnecting throttle motor connector together with water by-pass hose No. 5 and water by-pass hose No. 4. Remove the throttle with motor body assembly and gasket by eliminating the 4 bolts in the final step.
Throttle Body
22030-0P010
Q: How to install the throttle body with motor assembly on Toyota 4Runner?
A:
The procedure to mount the throttle body with motor assembly onto the 1GR-FE engine control system begins with installing a new gasket then bolt the motor body to the throttle using 4 bolts which require 11 Nm (112 kgf-cm, 9 ft-lbf) torque. Integrate the water by-pass hoses No. 4 and No. 5 after connecting the throttle motor connector. Fasten the air cleaner assembly by using two bolts at 8.0 Nm torque setting then tighten the two hose clamps. Position the 2 wire harness clamps then link the mass air flow meter connector with the vacuum hose and ventilation hose No. 2. For the next step use a cable to connect with the negative battery terminal before tightening it at 3.9 Nm (40 kgf-cm, 35 in-lbf). After adding coolant it is essential to inspect the area for fluid leaks in any region. Fasten the V-bank cover with 2 nuts then tighten them to 7.5 Nm (76 kgf-cm, 66 in-lbf).