My Garage
Cart
Make sure this part fits

Toyota 22030-0F010
Throttle Body

2005-2009 Toyota 220300F010

Customer Questions & Expert Answers (17)
Toyota 22030-0F010 Throttle Body
Toyota 22030-0F010 Throttle Body
  • Part Description
    Body Assembly, Throttle; Fuel Injection Throttle Body Assembly; Fuel Injection ETB Assembly
  • Part Name Code
    22030
  • Replaces
    22030-50200
  • Manufacturer
    Toyota
Make sure this part fits
$354.79 MSRP: $519.95
You Save: $165.16 (32%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code22030
    Manufacturer Part Number22030-0F010
    Part DescriptionBody Assembly, Throttle; Fuel Injection Throttle Body Assembly; Fuel Injection ETB Assembly
    Other NamesBody Assembly, Throttle W/Throttle Position Sensor
    Manufacturer Note(L)
    Item Dimensions9.1 x 7.9 x 6.1 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22030-50200
    ManufacturerToyota
    SKU22030-0F010
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Toyota 4RunnerLimited, Sport, SR58 Cyl 4.7 L GAS
    2006-2007 Toyota Land CruiserBase8 Cyl 4.7 L GAS
    2005-2009 Toyota SequoiaLimited, SR58 Cyl 4.7 L GAS
    2005-2009 Toyota TundraBase, Limited, SR58 Cyl 4.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Any advice on whether 22030-0F010 is suitable for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 22030-0F010 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How is the V-bank cover installed for the 2009 Toyota 4Runner? Posted by Customer
    A:
    Install the V-bank cover using 2 nuts, torqued to 7.5 Nm (76 kgf-cm, 66 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be done after draining the engine coolant for the 2008 Toyota 4Runner? Posted by Customer
    A:
    Remove the throttle body cover sub-assembly by taking off the 2 nuts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What are the steps to install the air cleaner assembly for the 2007 Toyota 4Runner? Posted by Customer
    A:
    Install the air cleaner assembly with the 2 bolts, torqued to 8.0 N.m (82 kgf.cm, 71 in.lbf), tighten the 2 hose clamps, and reinstall the 2 wire harness clamps.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What is the first step to replace the throttle body for the 2005 Toyota 4Runner? Posted by Customer
    A:
    First, drain the engine coolant and remove the V-bank cover by taking off the 2 nuts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    How do you remove the throttle w/motor body assembly for the 2006 Toyota 4Runner? Posted by Customer
    A:
    Disconnect the throttle motor connector and remove the 4 bolts, throttle w/motor body, and gasket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What is the first step to service and repair the throttle body for the 2006 Toyota Land Cruiser? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal and wait at least 90 seconds to prevent airbag and seat belt pretensioner activation.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What is the required torque for securing the throttle body for the 2007 Toyota Sequoia? Posted by Customer
    A:
    14 N.m (143 kgf.cm, 10 ft.lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What is the final step before reinstalling the throttle body cover for the 2006 Toyota Sequoia? Posted by Customer
    A:
    Fill the system with engine coolant, start the engine, and check for any coolant leaks.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be reconnected after installing the throttle body for the 2007 Toyota Land Cruiser? Posted by Customer
    A:
    Reconnect the two water by-pass hoses and the throttle position sensor and control connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What steps should be taken after reassembling the throttle body assembly for the 2008 Toyota Sequoia? Posted by Customer
    A:
    Reconnect the battery cable and replace the ECM, then disconnect the EFI fuse and ETCS fuse simultaneously, wait at least 60 seconds, and reconnect the fuses.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What is the first step to service and repair the throttle body for the 2005 Toyota Sequoia? Posted by Customer
    A:
    Begin by removing the throttle body cover and draining the engine coolant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What is the final step after completing the installation for the 2009 Toyota Sequoia? Posted by Customer
    A:
    Perform a road test to confirm there are no abnormalities.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What is the final step in removing the throttle body for the 2009 Toyota Tundra? Posted by Customer
    A:
    Remove the four bolts to take out the throttle body with motor and gasket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    Why is it important to wait 90 seconds after turning off the ignition for the 2008 Toyota Tundra? Posted by Customer
    A:
    To allow the navigation system to record memory and settings.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    How do you remove the throttle body for the 2006 Toyota Tundra? Posted by Customer
    A:
    Disconnect the throttle motor connector and remove the 4 bolts along with the throttle body and gasket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    Q:
    What components need to be taken off next for the 2007 Toyota Tundra? Posted by Customer
    A:
    Remove the front cowl top outer panel subassembly, the V-bank cover, the No. 2 air cleaner hose, and the air cleaner assembly with element.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Throttle Body
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 22030-0F010, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 22030-0F010 Throttle Body. It is sometimes referred to as Toyota Throttle Body. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 220300F010 Throttle Body. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery