Other Name: Motor&Pump Assembly, F; Windshield Washer Pump; Washer Pump Repair Kit; Motor & Pump Assembly; Front Pump; Front Washer Pump; Rear Washer Pump; Motor And Pump Assembly, Windshield Washer
Part Name Code: 85310
Item Weight: 0.60 Pounds
Item Dimensions: 13.8 x 12.0 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85330-60190
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Motor&Pump Assembly, F; Back Glass Washer Pump; Washer Pump Repair Kit; Windshield Washer Pump; Rear Pump; Rear Washer Pump; Motor & Pump Assembly, Rear Washer; Motor Assembly, Rear Washer
Item Weight: 0.60 Pounds
Item Dimensions: 14.0 x 12.2 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85330-60180
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2010 Toyota Yaris Submodels:
Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
2010 Toyota Yaris Washer Pump
Looking for affordable OEM 2010 Toyota Yaris Washer Pump? Explore our comprehensive catalogue of genuine 2010 Toyota Yaris Washer Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Toyota Yaris Washer Pump Parts Q&A
Q: How to install the windshield Washer Pump assembly on 2010 Toyota Yaris?
A: The first step to install the windshield washer motor and pump assembly requires placing it onto the washer jar packing material. Start by installing the windshield washer jar assembly while fixture two bolts securing the washer level warning switch to 5.5 Nm (56 kgf-cm, 49 in-lbf) and linking three connectors before adding two harness clamps. The assembly needs two 5.5 Nm (56 kgf-cm, 49 in-lbf) torqued bolts but only two connectors and two harness clamps should be connected if no warning switch is present. Attach the washer hose to the washer motor and pump before adding washer fluid inside the washer jar. Position the RH headlight assembly as well as the front bumper cover for installation. Secure the cable to the negative battery terminal while torquing it to 5.4 Nm (55 kgf-cm, 48 in-lbf).