Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Right; Head Air Bag; Air Bag Assembly, Curtain Shield, Passenger Side
Position: Passenger Side
Part Name Code: 62170A
Item Weight: 11.70 Pounds
Item Dimensions: 47.8 x 18.7 x 9.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 62170-52040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2010 Toyota Yaris Submodels:
Base, S | 4 Cyl 1.5 L GAS
2010 Toyota Yaris Air Bag
Looking for affordable OEM 2010 Toyota Yaris Air Bag? Explore our comprehensive catalogue of genuine 2010 Toyota Yaris Air Bag. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Toyota Yaris Air Bag Parts Q&A
Q: How to dispose of the front seat side Air Bag assembly on 2010 Toyota Yaris?
A: The process to dispose of front seat side Air Bag assemblies starts with deploying the Air Bag through the use of specified SST number 09082-00700 while using a battery prepared as power source. Check that the LED lights by connecting the red SST clip to the positive battery terminal followed by the black clip to the negative terminal then pressing the SST activation switch. The front seat side Air Bag assembly must not be used when the LED light turns on without pressing the switch. Remove the SST from the battery power source and then disconnect the negative battery cable before you can remove the connector clamp and separate the Air Bag connector without harming the Air Bag wire harness. Before installing the SST: 09082-00700 on the front seat side Air Bag do not engage the secondary lock of the twin lock system and position the SST at least 10 meters (33 feet) from the vehicle then close all openings along with windows and restore the SST connection to the battery. If clearing the Air Bag involves the SST activation switch deployment then press the switch only after checking for both occupants and a 10 m (33 ft) safe zone around the car. The Air Bag will create a loud explosion and develop heat levels that make contact unsafe for at least 30 minutes. Gloves along with safety glasses must be used to handle the deployed Air Bag with subsequent hand washing under water after completing the operation. When discarding the Air Bag outside of its vehicle installation check the SST: 09082-00700 function to deploy and tie the Air Bag securely with a service-purpose wire harness with a minimum cross-section of 1.25 mm. Arrange the Air Bag within a waste tire by placing a minimum of two tires below and above it then connecting them through wire harnesses. Staff should connect the SST without secondary lock engagement before deploying the Air Bag in an empty space away from personnel. After Air Bag deployment you need to extract it from the tire before placing it in plastic before tight tying and final disposal as general waste.