How to remove and replace the Rack And Pinion on 2010 Toyota Camry?

Begin the replacement of the power steering link by facing your front wheels in a straight position and disconnecting the negative battery terminal cable. You should first remove the front wheels then fasten the steering wheel using the seat belt to stop its rotation for safeguarding the spiral cable from damage. Extract the bolt while guiding the steering intermediate shaft assembly through its movement until reaching the rack and pinion assembly. Maintain proper separation between these two elements. Note down the relative positions of the steering intermediate shaft assembly and rack and pinion assembly before they get separated. Separate the left-hand tie rod assembly from the steering knuckle while using Special Service Tool: 09628-00011 secured to the tool will prevent falling or damage to front disc brake dust cover and ball joint dust cover and steering knuckle. The right-hand tie rod assembly also needs analysis through execution of the same steps with this equipment. The service unpacks the engine assembly with transaxle before moving on to take out both No. 1 front stabilizer brackets LH and RH. The final step involves rack and pinion assembly removal through procedure of withdrawing two bolts and two nuts without turning the nut because it possesses its built-in stopper since the bolt needs to stay loose with the nut in position.

OEM 2010 Toyota Camry Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rack And Pinions found

View related parts
2010 Toyota Camry Steering Gear
Part Number: 44200-33472
$718.56 MSRP: $1053.06
You Save: $334.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly, Electrical; Rack and Pinion Assembly; Steering Gearbox; EPS R/P; Gear Assembly; Link Assembly, Power Steering
- Replaces: 44200-33471, 44200-33470
- Part Name Code: 44200
- Item Weight: 21.60 Pounds
- Item Dimensions: 40.6 x 13.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44200-33472
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2010 Toyota Camry Steering Gear
Part Number: 44250-06330
$653.07 MSRP: $957.08
You Save: $304.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Power Steering; Rack and Pinion Assembly; Steering Gearbox; Rack & Pinion; Gear Assembly; Gear Assembly, Power Steering(For Rack & Pinion)
- Part Name Code: 44250
- Item Weight: 23.30 Pounds
- Item Dimensions: 51.2 x 10.8 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44250-06330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, LE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Steering Gear
Part Number: 44250-06340
$653.07 MSRP: $957.08
You Save: $304.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Power Steering; Rack and Pinion Assembly; Steering Gearbox; Rack & Pinion; Gear Assembly; Gear Assembly, Power Steering(For Rack & Pinion)
- Part Name Code: 44250
- Item Weight: 24.00 Pounds
- Item Dimensions: 49.7 x 10.5 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44250-06340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Steering Gear
Part Number: 44200-33480
$679.29 MSRP: $995.50
You Save: $316.21 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly, Power Steering; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly
- Part Name Code: 44200
- Item Weight: 22.20 Pounds
- Item Dimensions: 51.2 x 10.4 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44200-33480
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2010 Toyota Camry Rack And Pinion

Looking for affordable OEM 2010 Toyota Camry Rack And Pinion? Explore our comprehensive catalogue of genuine 2010 Toyota Camry Rack And Pinion. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Camry Parts Questions & Experts Answers

Q: How to remove and replace the Rack And Pinion on 2010 Toyota Camry?
A: Begin the replacement of the power steering link by facing your front wheels in a straight position and disconnecting the negative battery terminal cable. You should first remove the front wheels then fasten the steering wheel using the seat belt to stop its rotation for safeguarding the spiral cable from damage. Extract the bolt while guiding the steering intermediate shaft assembly through its movement until reaching the rack and pinion assembly. Maintain proper separation between these two elements. Note down the relative positions of the steering intermediate shaft assembly and rack and pinion assembly before they get separated. Separate the left-hand tie rod assembly from the steering knuckle while using Special Service Tool: 09628-00011 secured to the tool will prevent falling or damage to front disc brake dust cover and ball joint dust cover and steering knuckle. The right-hand tie rod assembly also needs analysis through execution of the same steps with this equipment. The service unpacks the engine assembly with transaxle before moving on to take out both No. 1 front stabilizer brackets LH and RH. The final step involves rack and pinion assembly removal through procedure of withdrawing two bolts and two nuts without turning the nut because it possesses its built-in stopper since the bolt needs to stay loose with the nut in position.