How to install the hood cable assembly and related components on 2010 Scion xD?

Follow the procedure manual to install the hood lock control cable assembly by inserting it through the engine compartment while connecting clamps based on implementation illustrations. The hood lock control lever sub-assembly needs installation followed by hood cable connection. To assemble the hood lock, apply MP grease to its moving surfaces next insert the hood cable then fasten it with three bolts torqued to 7.5 Nm tension. Conduct an inspection then readjust the hood sub-assembly when needed. Install the front fender liner LH by securing it with new grommets and 8 clips as well as 6 screws while making sure the pin hold clip maintains a vertical alignment without rotations. Install the side mudguard after attaching the rocker panel moulding cover and finish by putting on the front wheel.

OEM 2010 Scion xD Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

View related parts
2010 Scion xD Release Cable, Front
Part Number: 53630-52110
$35.40 MSRP: $49.28
You Save: $13.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Part Name Code: 53630
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.9 x 10.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53630-52110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2010 Scion xD Release Handle, Dark Gray, Front
Part Number: 53601-02020-B1
$46.38 MSRP: $64.56
You Save: $18.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 0.7 x 12.4 x 20.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53601-02020-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2010 Scion xD Hood Cable

Looking for affordable OEM 2010 Scion xD Hood Cable? Explore our comprehensive catalogue of genuine 2010 Scion xD Hood Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xD Parts Questions & Experts Answers

Q: How to install the hood cable assembly and related components on 2010 Scion xD?
A: Follow the procedure manual to install the hood lock control cable assembly by inserting it through the engine compartment while connecting clamps based on implementation illustrations. The hood lock control lever sub-assembly needs installation followed by hood cable connection. To assemble the hood lock, apply MP grease to its moving surfaces next insert the hood cable then fasten it with three bolts torqued to 7.5 Nm tension. Conduct an inspection then readjust the hood sub-assembly when needed. Install the front fender liner LH by securing it with new grommets and 8 clips as well as 6 screws while making sure the pin hold clip maintains a vertical alignment without rotations. Install the side mudguard after attaching the rocker panel moulding cover and finish by putting on the front wheel.