How to install the Canister Purge Valve on 2010 Scion xD?

Begin the installation of the Canister Purge Valve by using the screw to fasten it and connecting two hoses to its openings. You must then connect the Canister Purge Valve connector followed by the wire harness clamp. The installation of the No. 2 cylinder head cover should follow these completion steps.

OEM 2010 Scion xD Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2010 Scion xD Purge Solenoid, Driver Side
Part Number: 90910-TC001
$68.36 MSRP: $95.97
You Save: $27.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Duty Vacuum Switching; EGR Vacuum Delay Valve; Vapor Canister Purge Solenoid; Air Injection Check Valve; Vacuum Switch; Vacuum Valve; Air Switch Valve; Valve; Vacuum Delay Valve
- Manufacturer Note: MARK 90910-TC001
- Position: Driver Side
- Replaces: 90910-12276
- Part Name Code: 17650G
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.6 x 3.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90910-TC001
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2010 Scion xD Canister Purge Valve

Looking for affordable OEM 2010 Scion xD Canister Purge Valve? Explore our comprehensive catalogue of genuine 2010 Scion xD Canister Purge Valve. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xD Parts Questions & Experts Answers

Q: How to install the Canister Purge Valve on 2010 Scion xD?
A: Begin the installation of the Canister Purge Valve by using the screw to fasten it and connecting two hoses to its openings. You must then connect the Canister Purge Valve connector followed by the wire harness clamp. The installation of the No. 2 cylinder head cover should follow these completion steps.