OEM 2009 Toyota Yaris ABS Control Module

2009 Toyota Yaris Parts Questions & Experts Answers

• Q: How to remove the ABS Control Module for Antilock Brakes on 2009 Toyota Yaris?

  A: The first step to remove the Hydraulic Control Assembly for Antilock Brakes starts with draining brake fluid before cleaning painted surfaces which touched fluid. The first step includes the removal of battery and its supporting hardware consisting of battery tray and carrier. The Sedan requires users to loosen the clamp then move the lock lever to unlock the assembly before disconnecting the brake actuator connector with emphasis to stop brake fluid from entering the separated connector. A union nut wrench functions to disconnect the brake tube from the front flexible hose and to separate the 2 brake tubes from brake tube No. 1 way and from the brake master cylinder and the 6 brake tubes from the brake actuator. Label all brake tubes before disconnecting their clamp while removing the actuator with bracket by removing three bracket screws without causing damage to brake tubes or wire harnesses. To service the Hatchback brake actuator disconnect its connector by releasing the lock lever and maintain caution when dealing with fluid leakage. A union nut wrench should be used to disconnect the brake tube from the front flexible hose and then separate both brake tubes from brake tube No. 1 way and both brake tubes from the brake master cylinder and all six brake tubes from the brake actuator. After labelling the tubes you should proceed to disconnect the brake tube clamp then remove the three bolts that detach the actuator with bracket. To separate the brake actuator with bracket one must disconnect the brake tube clamp and remove the three bolts. To separate the actuator bracket assembly install the Sedan with 2 nuts removal and the Hatchback needs 3 bolts.