How to remove and replace the Air Injection Pump on 2009 Toyota Tundra?

Before uninstalling the Air Injection Pump you need to detach the negative battery cable and spend a minimum of ninety seconds with the ignition off for the navigation system to store its memory. The right-hand side front fender liner can be removed through the removal of nine clips. Use a clip remover to remove two clips that enable the detachment of the No. 3 air injection system hose. Afterward, unfold the fender apron seal and disconnect 2 connectors and remove 2 connector clamps before unfastening 2 clamps and 2 bracket clips to remove the hose completely. Detach the bracket clip to take away the No. 2 air injection system hose. Finish the task by taking out 2 bolts and 2 nuts from the air pump assembly.

OEM 2009 Toyota Tundra Air Injection Pump

SAI Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Injection Pumps found

View related parts
2009 Toyota Tundra Pump Assembly, Air, Driver Side
Part Number: 17600-0F010
$456.26 MSRP: $668.65
You Save: $212.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Air W/Bra; Secondary Air Injection Pump
- Position: Driver Side
- Part Name Code: 17600C
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.4 x 9.7 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17600-0F010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2009 Toyota Tundra A.I.R. Pump, Passenger Side
Part Number: 17610-0C010
$408.82 MSRP: $599.12
You Save: $190.30 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Air; Secondary Air Injection Pump, Right; Secondary Air Injection Pump
- Position: Passenger Side
- Part Name Code: 17610C
- Item Weight: 3.00 Pounds
- Item Dimensions: 7.2 x 6.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17610-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tundra Submodels:
- Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2009 Toyota Tundra Pump Assembly, Air, Driver Side
Part Number: 17610-0S010
$385.09 MSRP: $564.37
You Save: $179.28 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Secondary Air Injection Pump
- Position: Driver Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 7.1 x 6.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17610-0S010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Tundra Air Injection Pump

Looking for affordable OEM 2009 Toyota Tundra Air Injection Pump? Explore our comprehensive catalogue of genuine 2009 Toyota Tundra Air Injection Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Tundra Parts Questions & Experts Answers

Q: How to remove and replace the Air Injection Pump on 2009 Toyota Tundra?
A: Before uninstalling the Air Injection Pump you need to detach the negative battery cable and spend a minimum of ninety seconds with the ignition off for the navigation system to store its memory. The right-hand side front fender liner can be removed through the removal of nine clips. Use a clip remover to remove two clips that enable the detachment of the No. 3 air injection system hose. Afterward, unfold the fender apron seal and disconnect 2 connectors and remove 2 connector clamps before unfastening 2 clamps and 2 bracket clips to remove the hose completely. Detach the bracket clip to take away the No. 2 air injection system hose. Finish the task by taking out 2 bolts and 2 nuts from the air pump assembly.