Other Name: Manifold Sub-Assembly, Exhaust; Exhaust Manifold, Right; Manifold Sub-Assembly, Exhaust, Passenger Side
Position: Passenger Side
Replaces: 17104-38010
Part Name Code: 17104
Item Weight: 12.80 Pounds
Item Dimensions: 18.0 x 11.7 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 17104-38011
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tundra Submodels:
1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2009 Toyota Tundra Exhaust Manifold
Looking for affordable OEM 2009 Toyota Tundra Exhaust Manifold? Explore our comprehensive catalogue of genuine 2009 Toyota Tundra Exhaust Manifold. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Tundra Exhaust Manifold Parts Q&A
Q: How to install the exhaust manifold and related components on 2009 Toyota Tundra?
A: Set the new gasket on the cylinder head LH with the oval side facing backward before installing the exhaust manifold by using six fresh nuts that require 21 Nm (214 kgf-cm, 15 ft-lbf) torque. The next step involves implementing the No. 2 exhaust manifold heat insulator through 3 bolts which need torquing to 8.5 Nm (87 kgf-cm, 75 in-lbf). The installation of the exhaust manifold begins with inserting the new gasket onto the cylinder head RH side with the oval facing forward while paying attention to the correct orientation then tightening 6 new nuts to 21 Nm (214 kgf-cm, 15 ft-lbf). Proceed with installing the front exhaust pipe assembly and then continue with front No. 2 exhaust pipe assembly installation for the Regular Cab Standard Deck, after which install the front No. 2 exhaust pipe assembly that excludes the Standard Deck Regular Cab models. The technician should install the air switching valve assembly. Complete the installation by connecting the cable to the negative battery terminal although some systems demand system initialization after the reconnection process.