How to remove the rear door lock actuator on 2009 Toyota Sequoia?

The process to remove the rear door lock actuator starts with taking off the rear door frame garnish and then continuing with the rear door armrest base upper panel and the rear door inside handle bezel plug until you complete removal by dismounting the rear door trim board sub-assembly. You should remove the rear door trim No. 2 bracket followed by the rear door service hole cover. Continue by disconnecting the rear door glass run and also remove the rear door window frame rear lower sub-assembly and rear door glass sub-assembly. A "TORX" socket wrench T30 should be used to remove three screws while moving the rear door downwards before pulling off the release plate from the frame that holds the outside handle. A protective tape-wrapped screwdriver should be used to open the cover by disengaging the claw after the rear door lock wire harness seal is removed from the lock. A screwdriver protected by tape is used to remove the rear door lock remote control cable followed by disengaging three claws from the cover before taking off the rear door inside locking cable.

OEM 2009 Toyota Sequoia Door Lock Actuator

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Lock Actuators found

View related parts
2009 Toyota Sequoia Lock Actuator, Driver Side
Part Number: 69040-0C050
$254.66 MSRP: $363.60
You Save: $108.94 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69040-06180
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Lock Actuator, Driver Side
Part Number: 69060-0C060
$235.20 MSRP: $335.81
You Save: $100.61 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Latch Assembly, Rear Left; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock Assembly; Lock Assembly, Rear Door W/Motor, Driver Side
- Position: Driver Side
- Replaces: 69060-0C030
- Part Name Code: 69060A
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.7 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69060-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Lock Actuator, Passenger Side
Part Number: 69050-0C060
$235.20 MSRP: $335.81
You Save: $100.61 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Latch Assembly, Rear Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock Assembly; Lock Assembly, Rear Door W/Motor, Passenger Side
- Position: Passenger Side
- Replaces: 69050-0C030
- Part Name Code: 69050A
- Item Weight: 3.20 Pounds
- Item Dimensions: 8.1 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69050-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Lock Assembly, Front Door W/Motor, Passenger Side
Part Number: 69030-0C050
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Passenger Side; Door Lock Actuator Motor; Actuator; Lock
- Position: Passenger Side
- Replaces: 69030-06200
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.2 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Door Lock Actuator

Looking for affordable OEM 2009 Toyota Sequoia Door Lock Actuator? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Door Lock Actuator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to remove the rear door lock actuator on 2009 Toyota Sequoia?
A: The process to remove the rear door lock actuator starts with taking off the rear door frame garnish and then continuing with the rear door armrest base upper panel and the rear door inside handle bezel plug until you complete removal by dismounting the rear door trim board sub-assembly. You should remove the rear door trim No. 2 bracket followed by the rear door service hole cover. Continue by disconnecting the rear door glass run and also remove the rear door window frame rear lower sub-assembly and rear door glass sub-assembly. A "TORX" socket wrench T30 should be used to remove three screws while moving the rear door downwards before pulling off the release plate from the frame that holds the outside handle. A protective tape-wrapped screwdriver should be used to open the cover by disengaging the claw after the rear door lock wire harness seal is removed from the lock. A screwdriver protected by tape is used to remove the rear door lock remote control cable followed by disengaging three claws from the cover before taking off the rear door inside locking cable.