My Garage
Cart
Make sure this part fits

Toyota 69050-0C060
Lock Actuator, Passenger Side

2007-2022 Toyota 690500C060

Customer Questions & Expert Answers (13)
Toyota 69050-0C060 Lock Actuator, Passenger Side
Toyota 69050-0C060 Lock Actuator, Passenger Side
  • Part Description
    Lock Assembly, Rear Door W; Door Latch Assembly, Rear Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock
  • Part Name Code
    69050A
  • Position
    Passenger Side
  • Replaces
    69050-0C030
  • Manufacturer
    Toyota
Make sure this part fits
$235.20 MSRP: $335.81
You Save: $100.61 (30%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code69050A
    Manufacturer Part Number69050-0C060
    Part DescriptionLock Assembly, Rear Door W; Door Latch Assembly, Rear Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock
    Other NamesLock Assembly; Lock Assembly, Rear Door W/Motor, Passenger Side
    Item Dimensions8.1 x 5.5 x 5.5 inches
    Item Weight3.20 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces69050-0C030
    ManufacturerToyota
    SKU69050-0C060
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2022 Toyota SequoiaLimited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
    2007-2021 Toyota Tundra1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 69050-0C060 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 69050-0C060 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to install the rear door lock for the LH side of a Double Cab on Toyota Tundra? Posted by Customer
    A:
    The process to install the rear door lock for the LH side of a Double Cab requires first installing the rear door inside locking cable assembly LH followed by the rear door lock remote control cable assembly LH. Start by placing the rear door lock assembly LH afterward install the rear door glass sub-assembly LH followed by the rear door window rear lower frame sub-assembly LH. Mount the rear door glass run LH followed by the rear door service hole cover LH. Now you can install the rear No. 2 door trim bracket then put on the rear door trim board sub-assembly LH. The sequence continues with installing rear door armrest cover LH followed by the courtesy light assembly installation process. The complete installation requires attaching the rear door frame garnish LH followed by the rear door armrest upper base panel LH and the rear door inside handle bezel plug LH. Summarize the procedure by connecting the cable to the negative battery terminal along with an acknowledgment that various systems often need to be initialized upon reestablishing power.
    Posted by ToyotaPartsNow Specialist
    Q:
    What tool is used to install the front door lock for the 2009 Toyota Sequoia? Posted by Customer
    A:
    A "TORX" socket wrench T30.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step regarding the door lock wire harness for the 2009 Toyota Sequoia? Posted by Customer
    A:
    Remove the door lock wire harness seal from the rear door lock.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to install the rear door lock if reusing a previously removed lock for the 2009 Toyota Sequoia? Posted by Customer
    A:
    Replace the packing in the connecting part with new material and ensure that no grease or dirt is present on the packing surface.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the first step to install the rear door lock if reusing a previously removed door lock for the 2008 Toyota Sequoia? Posted by Customer
    A:
    Replace the packing in the connecting part with new material and ensure that no grease or dirt is present on the packing surface.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the first step to remove the rear door lock actuator for the 2008 Toyota Sequoia? Posted by Customer
    A:
    Begin by removing the rear door frame garnish.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to remove the front door lock actuator for the LH side of a Regular Cab for the 2009 Toyota Tundra? Posted by Customer
    A:
    First, disconnect the cable from the negative battery terminal and wait at least 90 seconds after turning off the ignition switch.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after disconnecting the battery for the 2009 Toyota Tundra? Posted by Customer
    A:
    Remove the front door inside handle bezel plug, the front armrest upper base panel, and the front door lower frame bracket garnish.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What comes next in the removal process for the 2008 Toyota Sequoia? Posted by Customer
    A:
    Detach the front door trim board sub-assembly and the front door trim No. 1 bracket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be installed after the courtesy light assembly for the 2008 Toyota Tundra? Posted by Customer
    A:
    Install the rear door frame garnish LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What components are removed after the trim board and brackets for the 2008 Toyota Tundra? Posted by Customer
    A:
    Remove the front door glass sub-assembly LH, the front door lock assembly LH, the front door lock remote control cable assembly LH, and finally, the front door inside locking cable assembly LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed next for the 2008 Toyota Tundra? Posted by Customer
    A:
    Take out the courtesy light assembly, the rear door armrest cover LH, and the rear door trim board sub-assembly LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 69050-0C060, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 69050-0C060 Lock Actuator, Passenger Side. It is sometimes referred to as Toyota Door Lock, Toyota Door Lock Actuator, Toyota Rear Passenger Door Handle Latch, Toyota Door Latch Assembly. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 690500C060 Lock Actuator, Passenger Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery