Other Name: Motor&Pump Assembly, F; Windshield Washer Pump; Washer Pump Repair Kit; Motor & Pump Assembly; Front Pump; Front Washer Pump; Rear Washer Pump; Motor And Pump Assembly, Windshield Washer
Part Name Code: 85310
Item Weight: 0.60 Pounds
Item Dimensions: 13.8 x 12.0 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85330-60190
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Land Cruiser Submodels:
Other Name: Motor&Pump Assembly, F; Back Glass Washer Pump; Washer Pump Repair Kit; Windshield Washer Pump; Rear Pump; Rear Washer Pump; Motor & Pump Assembly, Rear Washer; Motor Assembly, Rear Washer
Item Weight: 0.60 Pounds
Item Dimensions: 14.0 x 12.2 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85330-60180
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Land Cruiser Submodels:
Base, Heritage Edition | 8 Cyl 5.7 L GAS
2009 Toyota Land Cruiser Washer Pump
Looking for affordable OEM 2009 Toyota Land Cruiser Washer Pump? Explore our comprehensive catalogue of genuine 2009 Toyota Land Cruiser Washer Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Land Cruiser Parts Questions & Experts Answers
Q: How to install the windshield washer pump and pump assembly on 2009 Toyota Land Cruiser?
A: Install the windshield washer motor and pump assembly by placing the washer motor with gasket according to illustration specifications while connecting the connector. The windshield washer jar receives first 4 bolts beforestricted using specified order to 8.0 Nm (82 kgf-cm, 71 in-lbf), then the headlight cleaner hose connects to the headlight cleaner motor and pump. Users must join two connectors to each other before adding the clamp but motorists without headlight cleaning must just join the connector before securing the clamp. Apply the washer inlet sub-assembly by tightening the clip. Use any washer fluid to fill the windshield jar assembly through connecting the washer hose to the washing pump motor. Apply the left-hand front fender liner using 12 clips and 2 new grommets where installation requires a T30 "TORX" socket for 2 screws. Obtain the body rocker panel moulding assembly LH and the side step assembly LH prior to installation of the front fender mudguard LH.