Other Name: Motor Assembly, Power Window Regulator; Motor, Center Left, Front Left, Rear Left, Rear Right; Door Lock Actuator; Motor; Power Window Regulator Assembly for Front Driver, Passenger, and Driver Side.
Replaces: 85720-35140
Item Weight: 1.30 Pounds
Item Dimensions: 7.4 x 4.6 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85720-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Motor Assembly, Power Window Regulator; Power Window Motor, Front Left; Door Lock Actuator Motor; Motor; Motor Assembly, Power Window Regulator, Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Motor Assembly, Power Window Regulator; Center Right, Front Right, Rear Left, Rear Right, Right; Motor; Power Window Regulator Assembly for Front Passenger, Driver, and Passenger Side.
Replaces: 85710-35180
Item Weight: 1.30 Pounds
Item Dimensions: 7.7 x 4.7 x 4.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85710-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
2009 Toyota Highlander Window Motor
Looking for affordable OEM 2009 Toyota Highlander Window Motor? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Window Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Highlander Parts Questions & Experts Answers
Q: How do you install the front and rear Window Motor assemblies for the doors on 2009 Toyota Highlander?
A: The front door power window regulator motor assembly requires placement of the regulator arm at a position below intermediate before securing it with 3 TORX (T25) screws at 5.4 Nm (55 kgf-cm, 48 in-lbf) torque. New rear window regulators use self-tapping screws to make new installation hole passages. The installation order includes front door window regulator sub-assembly followed by front door glass sub-assembly alongside front door service hole cover and front door inner glass Weather Strip and front door trim board sub-assembly with courtesy light assembly after which assist grip cover and front armrest upper base panel and front door inside handle bezel plug and front door lower frame bracket garnish. The rear power window regulator motor assembly should receive installation first by placing the regulator arm beneath the intermediate position then tightening it with three screws that require a "TORX" driver (T25) while applying 5.4 Nm (55 kgf-cm, 48 in-lbf) torque. Connect one lead directly to terminal 1 with its positive (+) pole then place the other lead with its negative (-) pole to terminal 2 of the rear power window regulator to operate the lift arm according to needs. After performing the step install the rear door window regulator sub-assembly and all accompanying components including rear door glass sub-assembly along with rear door quarter window glass the rear door window division bar sub-assembly the rear door glass run and the rear door Weather Strip. Continue installing the series of door components including the service hole cover, inner glass Weather Stripping, trim board sub-assembly, assist grip cover and upper base panel and inside handle bezel plug. Finish by connecting the negative battery terminal while acknowledging that certain systems need initialization upon re-establishing power and then initialize the driver side power window control system.