How to install the rear Brake Line on 2009 Toyota Highlander?

Examine that left and right flexible brake hoses cannot be confused with each other by double-checking the part numbers. Connect used hoses only when you verify their disconnection tags first. To connect the rear flexible hose towards the disc brake cylinder assembly start by using a union bolt combined with a new gasket. Tighten this assembly to 33 Nm (336 kgf-cm, 24 ft-lbf). The rear flexible hose needs to be attached to the bracket through a new clip which must be positioned at the maximum installation point. You must use a 10 mm union nut wrench to connect the brake line to front brake flexible hose yet you need to use a wrench to maintain flexible hose stability during this operation; if you lack a union nut wrench you should torque the components to 15 Nm (155 kgf-cm or 11 ft-lbf) or apply 14 Nm (143 kgf-cm or 10 ft-lbf) if using one. Download the brake line carefully without causing bending or damage while making sure no foreign substances can penetrate the tube. The torque application process requires a torque wrench with 250 mm (9.84 in.) fulcrum length where the union nut wrench remains parallel to its fitting on the torque wrench. The rear flexible hose must be installed to the absorber bracket by using a bolt with a torque setting of 19 Nm (194 kgf-cm, 14 ft-lbf). Installation ends with filling the brake fluid reservoir followed by bleeding the brake line and actuator and leakage inspection before checking the fluid level and installing the rear wheel at 103 Nm torque (1050 kgf-cm, 76 ft-lbf).

OEM 2009 Toyota Highlander Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
2009 Toyota Highlander Flex Hose, Front Driver Side
Part Number: 90947-A2053
$80.09 MSRP: $112.43
You Save: $32.34 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front Driver Side
- Replaces: 90947-02F80, 90947-02E95
- Part Name Code: 47313J
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.3 x 6.6 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2053
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Flex Hose, Front Passenger Side
Part Number: 90947-A2052
$80.09 MSRP: $112.43
You Save: $32.34 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 90947-02E94, 90947-02F79
- Part Name Code: 47313A
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 6.7 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2052
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Flex Hose, Rear Driver Side
Part Number: 90947-A2049
$76.54 MSRP: $107.44
You Save: $30.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 90947-02E97
- Part Name Code: 47319F
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2049
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Flex Hose, Passenger Side
Part Number: 90947-A2048
$76.54 MSRP: $107.44
You Save: $30.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Position: Passenger Side
- Replaces: 90947-02E96
- Part Name Code: 47318F
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.4 x 6.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2048
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Flex Hose, Rear Driver Side
Part Number: 90947-A2047
$71.92 MSRP: $100.95
You Save: $29.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 90947-02E99
- Part Name Code: 47319F
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.4 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2047
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Flex Hose, Passenger Side
Part Number: 90947-A2046
$71.92 MSRP: $100.95
You Save: $29.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Position: Passenger Side
- Replaces: 90947-02E98
- Part Name Code: 47318F
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.3 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2046
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Flex Hose, Front
Part Number: 90947-A2034
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front
- Part Name Code: 47313J
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2034
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Flex Hose, Passenger Side
Part Number: 90947-A2023
$71.56 MSRP: $100.45
You Save: $28.89 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Manufacturer Note: MEXICO SPEC
- Position: Passenger Side
- Replaces: 90947-02E79
- Part Name Code: 47318F
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.1 x 6.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2023
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2009 Toyota Highlander Brake Line

Looking for affordable OEM 2009 Toyota Highlander Brake Line? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Highlander Brake Line Parts Q&A

Q: How to install the rear Brake Line on 2009 Toyota Highlander?
A: Examine that left and right flexible brake hoses cannot be confused with each other by double-checking the part numbers. Connect used hoses only when you verify their disconnection tags first. To connect the rear flexible hose towards the disc brake cylinder assembly start by using a union bolt combined with a new gasket. Tighten this assembly to 33 Nm (336 kgf-cm, 24 ft-lbf). The rear flexible hose needs to be attached to the bracket through a new clip which must be positioned at the maximum installation point. You must use a 10 mm union nut wrench to connect the brake line to front brake flexible hose yet you need to use a wrench to maintain flexible hose stability during this operation; if you lack a union nut wrench you should torque the components to 15 Nm (155 kgf-cm or 11 ft-lbf) or apply 14 Nm (143 kgf-cm or 10 ft-lbf) if using one. Download the brake line carefully without causing bending or damage while making sure no foreign substances can penetrate the tube. The torque application process requires a torque wrench with 250 mm (9.84 in.) fulcrum length where the union nut wrench remains parallel to its fitting on the torque wrench. The rear flexible hose must be installed to the absorber bracket by using a bolt with a torque setting of 19 Nm (194 kgf-cm, 14 ft-lbf). Installation ends with filling the brake fluid reservoir followed by bleeding the brake line and actuator and leakage inspection before checking the fluid level and installing the rear wheel at 103 Nm torque (1050 kgf-cm, 76 ft-lbf).

Related 2009 Toyota Highlander Parts

Alternate Year Models

2008 Toyota Highlander Brake Line 2010 Toyota Highlander Brake Line