OEM 2009 Toyota FJ Cruiser Steering Angle Sensor

2009 Toyota FJ Cruiser Parts Questions & Experts Answers

• Q: How to install the steering angle sensor on 2009 Toyota FJ Cruiser?

  A: First observe the precautions associated with Air Bag systems before starting installation of the steering angle sensor. Start with sensor installation before connecting the harness and steering angle sensor connector which should be followed by steering sensor connector. Then install the spiral cable together with the upper steering column cover and the lower steering column cover. Adjust the spiral cable accordingly. The installation of steering wheel assembly follows where you should then examine the steering wheel center point. Before completion install the steering pad followed by both lower steering wheel covers (No.2 and No.3). Fasten the cable to the negative terminal with a torque requirement of 3.9 Nm. The initialization procedure follows the pad steering inspection to complete with a warning light check for the SRS system.