OEM 2008 Toyota FJ Cruiser Steering Angle Sensor

2008 Toyota FJ Cruiser Steering Angle Sensor Parts Q&A

• Q: How to install the steering angle sensor and ensure proper function of the SRS warning light on 2008 Toyota FJ Cruiser?

  A: Safety precautions for Air Bag systems should always be followed before starting this installation. Regardless of safety precautions regarding Air Bags begin by installing the steering angle sensor followed by the connection of harnesses and steering angle sensor connector then steering sensor connector. The installation requires the spiral cable before moving to the upper steering column cover and ending with the lower steering column cover. Fill the spiral cable according to specifications before mounting the steering wheel assembly while checking the steering wheel center alignment. Finish the installation process by placing the steering pad and cover lower elements at positions No.2 and No.3. Insert the wire cable to the minus side of the battery while tightening it using 3.9 Nm (40 kgf-cm, 35 in-lbf) torque. The inspection of the steering pad must be followed by performing initialization procedures with final verification of the SRS warning light operation.