OEM 2009 Toyota Camry Shift Cable

2009 Toyota Camry Shift Cable Parts Q&A

• Q: How to remove the Shift Cable assembly on 2009 Toyota Camry?

  A: The first step to disassemble the transmission control cable assembly requires you to unplug it from the negative battery terminal. Begin the procedure by removing first the No. 1 and then the No. 2 instrument cluster finish panel garnishes. Subsequently remove the shift lever knob sub-assembly and upper console panel. The transmission control cable assembly can be separated by removing two clips and removing the cable end which enables the cable assembly locks to pop out and giving the adjust nut 180 degrees clockwise rotation while holding it to separate the control cable assembly. The technician should begin by taking out the instrument panel safety pad sub-assembly followed by the air conditioner unit assembly before handling the center Air Bag sensor assembly. The service technician must remove the No. 1 engine cover sub-assembly together with the air cleaner inlet assembly along with the air cleaner cap sub-assembly followed by the air cleaner case sub-assembly. The battery and the transmission control cable assembly require removal while using the following procedure: detach 2 clips holding 2 cables near the transaxle, separate 2 cables from the control cable bracket by removing 2 clips, then remove 2 bolts, the control cable assembly, and the No. 2 shift cable grommet retainer from the control cable assembly.