How to remove the Hood Cable Assembly on 2009 Toyota Camry?

Start the Hood Cable Assembly removal process by disconnecting the front wheel followed by the removal of its extension pad through the 3 screws' removal. The front repair begins with removing the Cool Air Intake Duct Seal for 2GR-FE engines before moving onto Front Bumper Assembly extraction. The repair plan involves fog lights if they exist in the front bumper. Next proceed to remove the front fender liner after unfastening it with five clips and a bolt and four screws and a grommet. Proceed to eliminate the High Pitched Horn Assembly from the system. The Hood Lock Assembly needs three bolts removal along with disconnecting the hood cable before extraction of the assembly when an Engine Hood Courtesy Switch is not present. The Hood Lock Assembly that comes with the Engine Hood Courtesy Switch requires disconnecting its connector and removing 3 bolts to separate the hood cable prior to disassembly. The first step to disconnect the hood cable and proceed to take out the Hood Lock Control Lever Sub-Assembly. Finally detach the clamps with a screwdriver while keeping the tip tape-secured then extract the cable from the engine compartment for complete removal.

OEM 2009 Toyota Camry Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Hood Cables found

View related parts
2009 Toyota Camry Cable Handle, Gray, Front
Part Number: 53611-AA010-B1
$14.99 MSRP: $20.86
You Save: $5.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Replaces: 53611-12040-B5
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.4 x 11.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53611-AA010-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Release Handle, Brown, Front
Part Number: 53611-AA010-E1
$15.01 MSRP: $20.89
You Save: $5.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: GREGE,TRIM4#
- Position: Front
- Replaces: 53611-12040-E2
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.8 x 10.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53611-AA010-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Release Handle, Gray, Front
Part Number: 53611-AA010-B5
$15.01 MSRP: $20.89
You Save: $5.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.3 x 11.4 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53611-AA010-B5
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Release Cable, Front
Part Number: 53630-06100
$40.10 MSRP: $55.83
You Save: $15.73 (29%)
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Replaces: 53630-33140
- Part Name Code: 53630
- Item Weight: 0.70 Pounds
- Item Dimensions: 21.5 x 12.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53630-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Camry Hood Cable

Looking for affordable OEM 2009 Toyota Camry Hood Cable? Explore our comprehensive catalogue of genuine 2009 Toyota Camry Hood Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Parts Questions & Experts Answers

Q: How to remove the Hood Cable Assembly on 2009 Toyota Camry?
A: Start the Hood Cable Assembly removal process by disconnecting the front wheel followed by the removal of its extension pad through the 3 screws' removal. The front repair begins with removing the Cool Air Intake Duct Seal for 2GR-FE engines before moving onto Front Bumper Assembly extraction. The repair plan involves fog lights if they exist in the front bumper. Next proceed to remove the front fender liner after unfastening it with five clips and a bolt and four screws and a grommet. Proceed to eliminate the High Pitched Horn Assembly from the system. The Hood Lock Assembly needs three bolts removal along with disconnecting the hood cable before extraction of the assembly when an Engine Hood Courtesy Switch is not present. The Hood Lock Assembly that comes with the Engine Hood Courtesy Switch requires disconnecting its connector and removing 3 bolts to separate the hood cable prior to disassembly. The first step to disconnect the hood cable and proceed to take out the Hood Lock Control Lever Sub-Assembly. Finally detach the clamps with a screwdriver while keeping the tip tape-secured then extract the cable from the engine compartment for complete removal.